Travelling column milling machine

SHW PowerSpeed 5C

Year of construction 2013

Control system: SIEMENS Sinumerik 840D pl

HSK 100-A tool holder

TRAVEL
horizontal-longitudinal X = 8,000 mm
Vertical headstock slide Y = 1,600 mm
Gkedpfsu Sppwox Adhjf
Headstock horizontal-transverse Z = 1,300 mm

FUNCTIONAL PROBE: m&h HSK 100

SIEMENS B-MPI HAND-HELD CONTROL UNIT

TRAVELING WORK PLATFORM

3-SIDED SPRAY AND CHIP PROTECTION WALL

CHIP CONVEYOR

SPRAYING PLATE
Sizes: Length: 10,000 mm Width: 2,500 mm

WASHING GUN IN THE WORKROOM

REINFORCED COOLANT SYSTEM
Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l

COLLISION MONITORING SYSTEM 2 CHANNEL pcs.
2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2)

PENDULUM MACHINING 3 WORK AREAS

MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation)

ROTATED AXIS COORDINATE SYSTEM

2 PICK-UP STATION
For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6

AUTOMATIC TOOL CHANGER
Number of tools in chain magazine 48
Maximum tool diameter with magazine filled to mm 125
Maximum tool diameter with mm 250 free adjacent positions
Maximum tool length mm 500 - Maximum tool weight kg 25
Maximum tool load torque Nm 40
Tool holder HSK 100-A

HEAD CHANGE MAGAZINE

1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE

AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE
- High-frequency milling spindle:
- Integrated high-frequency spindle
- Tool holder HSK - A 63 DIN 69893
- Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED
- Speed range up to 20,000 1/min
- Motor spindle bearing with permanent grease lubrication
- Sealing air seal
- Torque: 40 Nm at 100% ED, 50 Nm at 40% ED
- Automatic tool clamping
- Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00

UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN
- Liquid-cooled milling head
- Cast construction made of GGG 60
- Milling head, automatically swivels 180 x 1 degree
- The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed
- Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec
- HSK 100-A tool holder
- The milling spindle is equipped with a hydromechanical quick tool clamping system
- Tool pull-in force: 45 kN
- Internal coolant supply form A-D
- External coolant supply via shower ring
- Speed range 22- 4,000 1/min

MAIN DRIVE
by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.