Piston Dosing Unit

Scheugenpflug DOS P016

Scheugenpflug DOS P016 Piston Dispenser

DOS P Piston Dispensing System
Giodpezc Nplsfx Abkeu
For a wide range of requirements

Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium.

The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes.

For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits
Dosing accuracy independent of temperature, pressure, or viscosity
Constant mixing ratio at all times due to parallel emptying of dosing cylinders
Wide range of applications (in terms of materials and use cases)

Key functions
Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio
Sensor-based monitoring of inlet and outlet valves as well as cylinder filling
Material temperature control via mixing tube heating (optional)
Camera-based dispensing needle monitoring (optional)

Product data

General
Materials: 1K and 2K
Viscosity: From liquid to high-viscosity
Fillers: Filled and/or abrasive media
Operating principle: Volumetric dispensing

Properties
Constant mixing ratio for 2K
Independent of temperature, material feed pressure, and casting resin viscosity
Precisely reproducible and highly accurate results
Maximum process reliability

Applications
Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top)

DOS P016
Max. volume/shot (2K at 1:1 ratio)
1K: 0.06/17 ml
2K: 0.1/32 ml
Max. dispensing speed [ml/s]: 2
Dispensing accuracy at max. stroke [%]: < 0.5
Heatability [°C]: up to 80

Outlets:
1K: 1–4, 6, 8
2K: 1–4
Weight: 14 kg

Dimensions (W x H x D)
290 x 350 x 230 mm

Video on operation

"Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de


You can find additional dosing units—new and used—in our shop!
International shipping costs available upon request!