Multi-chamber furnace

Sat B2599A

Sat B2599A Drawer oven 130 °C
If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution.

Oven data

Manufacturer: Sat
Model: B 2599 A
Type: 1000T
Type: Drawer oven
Outer dimensions of the furnace
width with control cabinet: 2500 mm
depth: 1700 mm
Height: 2250 mm

Usable volume in each drawer
width: 1200 mm
depth: 850 mm
Height: 170 mm (measured 178 mm)

Maximum working temperature: 130 °C

Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C

Frame :
The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is
painted in RAL 1013 (pearl white).
The furnace inner casing is made of aluminized steel sheet.
Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool.

Floor:
Same as the furnace walls, with 120 mm thick thermal insulation.
Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet.

Openings:
3 drawers, height 250 mm, for a usable load of 120 mm height.

Maintenance doors :
2-leaf maintenance door on the back of the oven.
Secured by screws.
This door allows complete access to the inside of the furnace.

Parts handling:
The handling of the parts is ensured by 3 drawers (one above the other).
Height between each drawer : 250 mm
Usable height per drawer : 170 mm, with almost 10 mm reserve.
Csdpfxjim Ik Se Ag Iehf
The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening.
Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface.
Load peaks up to 240 Kg can be supported.
The drawer seals are made of silicone.
The locks of each drawer are ensured by electromagnets and controlled by the Siemens system.
Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet).
Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet).
One temperature indicator is provided per drawer.
These indicators will be located on the front of the furnace, to the left of the drawers.

More industrial furnaces in other sizes - new and used - you can find in our store!
International shipping costs on request!