SAMAG MFZ 2-3

SAMAG MFZ 2-3

This 3-axis SAMAG MFZ 2-3 was manufactured in 2008. It features a working area of 300x500x450 mm, rapid traverse speeds up to 60 m/min, and a tool magazine with 90 positions. The spindle supports a speed range of 50 to 16,000 rpm with a drive power of 28 kW. Ideal for high precision and efficiency in machining tasks. Contact us for more information about this machine.

Machine Benefits

Technical Machine Benefits


• Required installation space (length x width): approx. 5950 mm x 6700 mm

• Weight (kg) including coolant system and chip conveyor: approx. 25000 kg

• Operating voltage: 400 v 3 n~ 50 hz

• Control/valve voltage: 24 v dc

• Machine power rating: approx. 82 kva

• Back-up fuse before main switch: 3 x 160 a

• Connector cross-section: 70 mm²

Extra Information

Ott Tool Clamping System
Torque (S1/S6): 63/83 Nm
Nominal Speed: 4200 rpm
Spindle Bearing Diameter: 70 mm
Spindle Lubrication: Lifetime grease lubrication
Ksdpjx Nr Ilsfx Aazjdg
1 Horizontal 180° swivel support (W-axis)
Faceplate Diameter (NC drive/counter bearing): 500/345 mm
Permissible Tangential Torque: 15000 Nm
Positioning Accuracy: ±3 angular seconds
Swivel Time (0°/180°): Approx. 6 s
Number of Horizontal 360° Workpiece Support Axes
Positioning via Face Gearing: 120 x 3°
Positioning Accuracy (120 x 3°): ±3 arc seconds
Max. Transport Load per A-axis: Approx. 600 kg
Permissible Tangential Torque: 5000 Nm
Working Area (interference circle x length): Ø700 x 940 (1036) mm
Approaching Intermediate Positions Outside the 3° Pitch: Possible (NC position control)
Positioning Accuracy: ±25 angular seconds
Permissible Tangential Torque: 1000 Nm
Tool Magazine: 90 tool positions (3 x 30)
Max. Tool Diameter with Free Adjacent Positions: 160 mm
Cut-to-Cut Time (within 1 cartridge): Approx. 5.2 s

Media

Hydraulic Unit Capacity: 160 l
Max. Operating Pressure: 160 bar
Max. Flow Rate: 12 l/min
Pneumatic System: Required Compressed Air Connection, Required Air Consumption (short-term) 6 ± 0.5 bar
Factory Air Quality: Class 545 according to DIN-ISO 8573-1
Coolant System: Knoll coolant system with coolant cooling
Coolant Tank Capacity: Max. 1400 l
Separate Machine Bed Flushing: 160 l/min at 2.6 bar
External Tool Cooling and Various Flushing Functions: 120 l/min at 3.5 bar
Internal Tool Cooling Through the Spindles: 40 l/min at 60 bar

Dimensions
Machine Depth 5450 mm