Vibratory finishing machine

Rösler RHBD 13/18T

2021 Rösler Model RHBD 13/18T Overhead Conveyor Shot Blasting System (only 2725 hours)
Hodpfxoy Am Duj Af Ejff

3 Part System. Modern, High-Performance Overhead Conveyor Shot Blasting System Designed For Continuous Surface Treatment Of Medium To Heavy Components. Suitable For Cleaning, Descaling And Surface Preparation Prior To Coating. The System Was Used For Blasting Magnesium Die-Cast Components. With The Same Blasting Media, The System Can Also Be Used For Aluminium Die-Casting Or Aluminium Casting, Brass Casting, E.G, Fittings. The Blast Cabinet Has Four Blast Turbines With Automatic Abrasive Recirculation For Continuous Use Of The Blasting Media. The System Has A Wet Separator. The Overhead Conveyor System Has 18 Rotating Stations To Which 18 Workpiece Carriers Can Be Attached. There Are 14 Stainless Steel Workpiece Carriers On Which Components Can Be Hung. Operating Hours: 2,725. Rated Power: 135 Kw/400v. 6 Blast Wheel Turbine. Rated Speed Per Turbine: 2,500 Rpm. Rated Blast Media Quantity Per Turbine 45Kg. With Circulating Overhead Conveyor, Including Workpiece Carrier, With Wet Filter System. Control System Siemens Simatic HMI. S/No.96410 (2021)

Overhead Conveyor Steel System Model RHBD. Shot Turbines Gamma. Gate Width 1,300mm, Gate Height 1,800mm. Pneumatic Gate Operation, 4 Gate Leaves. Safety Monitoring, Swivel Field Gate. Lifting/Lowering Device For Hooks. Wear Protection Plates 10mm Against Turbines And Ceiling. Wall Thickness Of Blasting Chamber 8mm. Filter System 4,000 M³/H. Wet Separator Type RF 800 NS, No. 96411. Conveyor System Freely Configurable. Maximum Hook Load Per Suspension 1,000kg. Workpiece Carriers In The Blasting Cabin Automatically Rotating, Freely Configurable. Recommended Diameter Of Hanging Workpiece Carriers 1,100mm. Recommended Height Of Hanging Workpiece Carriers 1,600mm. 14 Goods Carriers With A Diameter Of 1,000mm And A Height Of 1,450mm Available. Abrasive Return Via Linear Conveyor System And Elevator Conveyor Into The Feed Hopper. Abrasive Supply To The Blast Turbines Through Screw Distributors With Adjustable Abrasive Quantity. Occupational Safety And Explosion Protection Report For Magnesium Processing Available. Dimensions Of The Blast Cabinet Approximately: Width 2,800mm, Length Approximately 10,500mm, Height Approximately 3,500mm. Please Note The Machine Was Dismantled In August 2025.