Vertical machining center

Quaser MV 154 P

Travel ranges
Travel distance X-axis [mm] 760
Travel distance Y-axis [mm] 530
Travel distance Z-axis [mm] 560

Distance from spindle bottom edge to table [mm] 150-710

Work table
Table length [mm] 900
Table width [mm] 500
Number of T-slots 5
Slot width [mm] 18
Table load max. [kg] 500

Feed
Rapid traverse X- and Y-axis [m/min] 40
Rapid traverse Z-axis [m/min] 36
Max. axis acceleration X-axis [m/sec²] 6
Max. axis acceleration Y-axis [m/sec²] 5
Max. axis acceleration Z-axis [m/sec²] 5
Max. feed force X-axis [kN] 6.951
Max. feed force Y-axis [kN] 6.951
Max. feed force Z-axis [kN] 11.31
Diameter of ball screw X- and Y-axis [mm] 45
Diameter of ball screw Z-axis [mm] 45

Main spindle
Main spindle speed min. [1/min] 30
Main spindle speed max. [1/min] 12,000
Main spindle power [S6-40% duty cycle kW] [kW] 25
Main spindle torque max. [Nm] 159
Tool holder SK 40 DIN 69871 A

Tool magazine
Number of tool magazine positions 30
Tool change time chip-to-chip [sec] 4

Max. tool diameter [mm] 76
Max. tool diameter with adjacent space available [mm] 125
Csdpfx Acoz Dttgepjri
Max. tool length [mm] 280
Max. tool weight [kg] 7

Coolant system
Coolant tank volume [l] 300
Through-spindle cooling pressure [bar] 3.5
Through-spindle cooling [l/min] 60
Internal coolant supply pressure [bar] 20
Internal coolant supply [l/min] 25
Chip flushing pressure [bar] 3.5
Chip flushing [l/min] 60
Coolant spray gun yes
External compressed air supply yes
Separate oil cooler for main spindle yes
Oil cooling circuit [l] 100
Separate air supply for main motor yes

Basic machine data
Installation area width [mm] 2,540
Installation area depth [mm] 2,600
Machine height [mm] 2,930
Weight of basic machine [kg] 6,400
Electrical connection power [kVA] 25
Required pneumatic connection [bar] 6
Required compressed air [l/min] 300

Control system
Manufacturer Heidenhain
Control system type iTNC 530 HSCI with SmarT.NC

Chip disposal
Internal screw conveyor 2
Scraper belt conveyor to the outside 1

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.