Milling machine

Optimum F200 ECO

Machine is on display. Optimill F 200 ECO Premium CNC milling machine, direct from the manufacturer.

F 200 ECO – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is distinguished by its performance, speed, precision, and long service life.
Model: F200 ECO
Control: SIEMENS SINUMERIK 828D PPU271.5

Milling spindle belt drive

Machine Specifications
Electrical supply: 400 V / ~50 Hz
Total connected load: 20 kVA

Milling Spindle
Drive motor S1 operation: 9 kW
Drive motor S1 torque: 57 Nm
Drive motor S6 30% operation: 17.1 kW
Drive motor S6 30% torque: 118 Nm
Spindle taper: BT40
Drive motor S1 operation: 10.5 kW
Drive motor S1 torque: 50 Nm
Drive motor S6 30% operation: 26.4 kW
Drive motor S6 30% torque: 125 Nm

Coolant system
Iisdpfow Ea N Asx Acysh
Coolant pump power: 3 x 1 kW
Max. flow rate: 35 l/min
Tank capacity: 200 liters
Cleaning pump
Cleaning pump power: 530 W

Machining Precision
Repeatability: 0.008 mm
Positioning accuracy: 0.004 mm

Tool Changer
Type: Double-arm gripper
Number of tool stations: 24
Max. tool diameter: 78 mm
Max. tool diameter (with adjacent tool stations empty): 120 mm
Tool length: 300 mm
Max. tool weight: 8 kg
Tool change time (tool to tool): 2.5 seconds

Travel
X-axis: 850 mm
Y-axis: 500 mm
Z-axis: 550 mm

Feed Drive
Rapid traverse X-, Y-, Z-axis: 48 / 48 / 48 m/min

Motor Torque
X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm

Feed Forces
X / Y / Z-axis: 5.34 kN / 5.34 kN / 6.68 kN

Speed Range
Spindle speed*: 8,000 rpm

Pneumatics
Compressed air: 6 bar
Air consumption per hour: 6 – 8 kg/m³

Milling Table
Spindle-to-table distance: 100 – 650 mm
Table size (L x W): 1,000 x 500 mm
T-slot size / number / spacing: 18 mm / 5 / 100 mm
Maximum load capacity: 500 kg

Dimensions
Length x Width x Height: 2,400 x 2,355 x 2,860 mm
Total weight: 5,500 kg

Equipment
• Linear guides with ball screw drive for high rapid traverse speeds in all axes
• Telescopic way covers on all three axes
• Automatic lubrication
• Portable electronic handwheel with enabling switch and emergency stop
• RJ45 port and 230 V power connection
• Machine light in work area
• Cleaning gun
• Ball screws and linear guides by THK
• Chip flushing
• Spindle cooling (machining area)
• Control cabinet
• Arm tool changer
• SW24
• CE

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.