Industrial trailer 6t opt. with roof superstructure

Multi-Trans VAL 30

OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE!

Operating conditions:
The trailer is designed for use on level, paved roads in internal traffic.

Payload:
6 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification.

Base frame:
Sturdy welded construction made of sectional steel
Gsdpfx Aeuf N Dfoggokc

Loading area:
Size approx. 4100 x 2100 mm, load height approx. 560 mm, with screen printing plates
Deflectors on the front sides of the frame

Steering:
Four-wheel Ackermann steering, drawbar can be raised, cannot be repositioned or removed,
Drawbar safety device according to UVV

Chassis:
Both axles steered, wheels with solid rubber tires approx. 425 x 150 mm, wheel hubs with tapered roller bearings and
tapered roller bearings and permanent grease lubrication

Paint finish:
Top coat RAL 5002 ultramarine blue

Miscellaneous:
- Collision protection on the frame ends made of drop-shaped half shells.
- All-round anti-slip protection approx. 25 mm high
- Side underride guard at diagonal bar height
- Pin coupling with captive pin, pin spring-loaded Dm 30, on the rear side
- Double-acting wheel chock with chain
- Two reflectors at the rear
- prepared for roof mounting

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.