Milling machine

Mikron WF 3S

Universal Milling Machine Mikron WF 3S with 3-axis Heidenhain TNC 114 digital readout and infinitely variable feed

Iijdpow Ni Rijfx Acyeh
Technical Data:

>> Year of manufacture: approx. 1990
>> Fixed angle table, clamping surface 800 x 450 mm
>> Spindle speed: 50 - 2240 rpm
>> Infinitely variable feed on 3 axes from 1 to 750 mm/min
>> Rapid traverse on 3 axes: 1400 mm/min
>> Travels X/Y/Z: 500/500/380 mm
>> Vertical quill - SK40 extendable
>> Weight approx. 1600 kg

Accessories and Equipment:

>> 3-axis active digital readout Heidenhain TNC 114
>> Central lubrication
>> Operating manual, programming manual, electrical diagrams

About the Machine:

For sale is a used Mikron WF 3S universal milling machine. It features a Heidenhain path control TNC 114, which means it can move to a programmed dimension in any chosen axis (X, Y, or Z) and stops automatically upon reaching it. Four different zero points can be set, and dimensions can be entered as absolute or incremental values. The feed rate is infinitely adjustable from 0–750 mm/min, and can also be regulated during machining. Rapid traverse can be activated at the push of a button, while spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only adjustable when the machine is stationary. The vertical milling head is mounted with three bolts and can be removed and reattached in just 2 minutes. It is hand-fastened using the swing arm seen on the left side of the machine and can be simply swung aside. A key feature of the machine are the large travel distances relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Additionally, the machine is equipped with electronic protection for the vertical spindle. Both mechanically and electrically inspected. Take the opportunity to inspect and test the machine under power on site.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.