Micromill Challenger MM-430Micromill
Challenger MM-430
Micromill Challenger MM-430
Micromill
Challenger MM-430
سال ساخت
۲۰۱۲
وضعیت
کارکرده
موقعیت
آلمان 

اطلاعات پایه
- نام دستگاه:
- Micromill Challenger MM-430
- تولید کننده:
- Micromill
- مدل:
- Challenger MM-430
- سال ساخت:
- ۲۰۱۲
- وضعیت:
- آماده به کار (دست دوم)
- ساعات کارکرد:
- ۳٬۴۴۰ h
قیمت و مکان
- موقعیت:
- , آلمان

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۳٬۰۲۰ کیلوگرم
طول میز:
۴۱۰ میلیمتر
عرض میز:
۹۰۰ میلیمتر
اسپیندلها
حداکثر سرعت اسپیندل:
۸٬۰۰۰ دور/دقیقه
مخزن ابزار
تعداد جایگاهها در مگزین ابزار:
۱۶
مشخصات محور
مسافت جابجایی محور X:
۷۶۰ میلیمتر
جزئیات بیشتر
تولیدکننده کنترلر:
HEIDENHAIN
مدل کنترلر:
TNC 620
ظرفیت بار میز:
۳۵۰ کیلوگرم
تعداد محور:
۳
جزئیات پیشنهاد
- شناسه آگهی:
- A23327810
- شماره مرجع:
- DE-MIL-MIC-2012-00001
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۱.۰۸.۱۴۰۵
توضیحات
This 3-axis Micromill Challenger MM-430 was manufactured in 2012. It features a travel range of 760 mm in the X-axis, 430 mm in the Y-axis, and 390 mm in the Z-axis. The machine is equipped with a 16-station tool changer and a maximum spindle speed of 8,000 RPM. If you are looking to get high-quality machining capabilities, consider the Micromill Challenger MM-430 vertical machining centre we have for sale. Contact us for further details.
- Control Unit: Heidenhain TNC 620 (NC-Software 340561 03 SP2, NC Core 597110 05, PLC Software Buffalo_D03)- Operating Hours (Spindle): approx. 3,440 h (exact screen readout: 3439:44:56 h)- Operating Hours (Program Run): approx. 5,310 h (exact screen readout: 5308:21:15 h)- Operating Hours (Machine On): approx. 21,540 h (exact screen readout: 21535:12:59 h)- Operating Hours (Control On): 22349:11:05 h- Travel X-Axis: approx. 760 mm- Travel Y-Axis: approx. 430 mm- Travel Z-Axis: approx. 390 mm- Table Size: approx. 900 x 410 mm- Max. Table Load: 350 kg- Spindle Taper: SK 40- Max. Spindle Speed: 8,000 RPM- Tool Changer: 16-station tool changer- Rapid Traverse: approx. 24 m/min- Included Equipment: Chip conveyor (Betake), coolant system, electronic handwheel- Electrical Connection: 400 V / 50 Hz, 20 kVA- Machine Weight: approx. 3,020 kg
Technical Specification
Hedpfx Aks Ai Sccj Usnw
Taper Size SK 40
- Control Unit: Heidenhain TNC 620 (NC-Software 340561 03 SP2, NC Core 597110 05, PLC Software Buffalo_D03)- Operating Hours (Spindle): approx. 3,440 h (exact screen readout: 3439:44:56 h)- Operating Hours (Program Run): approx. 5,310 h (exact screen readout: 5308:21:15 h)- Operating Hours (Machine On): approx. 21,540 h (exact screen readout: 21535:12:59 h)- Operating Hours (Control On): 22349:11:05 h- Travel X-Axis: approx. 760 mm- Travel Y-Axis: approx. 430 mm- Travel Z-Axis: approx. 390 mm- Table Size: approx. 900 x 410 mm- Max. Table Load: 350 kg- Spindle Taper: SK 40- Max. Spindle Speed: 8,000 RPM- Tool Changer: 16-station tool changer- Rapid Traverse: approx. 24 m/min- Included Equipment: Chip conveyor (Betake), coolant system, electronic handwheel- Electrical Connection: 400 V / 50 Hz, 20 kVA- Machine Weight: approx. 3,020 kg
Technical Specification
Hedpfx Aks Ai Sccj Usnw
Taper Size SK 40
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
آلمان
۴٬۰۶۹ km
MicromillChallenger MM430
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است































