Rotary Welding TableMB
PRO 2 COM 1802
Rotary Welding Table
MB
PRO 2 COM 1802
وضعیت
جدید
موقعیت
Ahaus 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- 48683 Ahaus

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19924315
- شماره مرجع:
- 1125-8459010
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۸.۰۷.۱۴۰۴
توضیحات
table diameter 340 mm
table load 160 horizontal kg.
table load 100 vertikal kg.
turning speeds 0,6 - 6,0 U/min
swivelling range 0 - 90 Grad
bore 60,0 mm
motor 230 Volt
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time
- The turntable has a 60 mm hollow shaft
- The turntable has a diameter of
340 mm. The surface is chrome-plated for
Protection against welding spatter.
- The table speed is adjustable from 0.6 - 6 rpm.
- The control of the welding machine via
the turntable control is possible.
- The ground contact transmits 300 A / 100%.
- The turntable and the control are separate.
- HF protected.
- COM 1800 control with lap welding
- Operating instructions in German
Functions COM 1800 control:
- Right/left rotation
- Infinitely variable speed control
- Welding torch on/off
- Overlap welding adjustable
- Controller for rotation time (2-stroke / 4-stroke)
- Speed display
Fgodpfoxabm Nox Adqek
table load 160 horizontal kg.
table load 100 vertikal kg.
turning speeds 0,6 - 6,0 U/min
swivelling range 0 - 90 Grad
bore 60,0 mm
motor 230 Volt
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time
- The turntable has a 60 mm hollow shaft
- The turntable has a diameter of
340 mm. The surface is chrome-plated for
Protection against welding spatter.
- The table speed is adjustable from 0.6 - 6 rpm.
- The control of the welding machine via
the turntable control is possible.
- The ground contact transmits 300 A / 100%.
- The turntable and the control are separate.
- HF protected.
- COM 1800 control with lap welding
- Operating instructions in German
Functions COM 1800 control:
- Right/left rotation
- Infinitely variable speed control
- Welding torch on/off
- Overlap welding adjustable
- Controller for rotation time (2-stroke / 4-stroke)
- Speed display
Fgodpfoxabm Nox Adqek
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2011
ارسال درخواست
تلفن & فکس
+49 5939 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Zuchwil
۴٬۲۰۰ km
STAR MicronicsSH-12
آگهی کوچک
Gemmingen
۴٬۱۲۶ km
NS MaquinasDM 1100 C
آگهی کوچک
Mudersbach
۴٬۲۳۱ km
FastechFRS 2050 x 140
آگهی کوچک
Częstochowa
۳٬۴۷۷ km
OKIOAB6-C1400
آگهی کوچک
Siedlce
۳٬۳۴۶ km
CORMAKPS-500
آگهی کوچک
Hergensweiler
۴٬۰۴۱ km
Protec 10 TonnenRB 10 000 Rollenbock
آگهی کوچک
Wiefelstede
۴٬۲۸۰ km
EssDTH 120
آگهی کوچک
Hergensweiler
۴٬۰۴۱ km
Protec 30 ToRB 30 000
آگهی کوچک
Neukamperfehn
۴٬۳۱۹ km
SSI Schäfer PR600/ 5,03 lfm./ Ständer:2.350 x 800 mm/ Traversen: 2.400 mm
آگهی کوچک
Rheda-Wiedenbrück
۴٬۲۲۸ km
Tec-Point GmbHLMH-1500
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است












































































































