Water pump with petrol engine

koshin SEH-80X met Honda motor

The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications.

Key specifications:
• Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge).
• Head: Maximum 26 to 30 meters.
• Suction lift: Maximum 7 to 8 meters.
• Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP).
• Connection: 3" external thread (80 mm) for both inlet and outlet.
• Solids passage: Suitable for solids up to a maximum of 3 mm.
• Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation.
• Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm.

Construction & Durability
• Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum.
• Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge).
• Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life.
• Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress.
• Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage.

Performance at different heights
The pump delivers less water as the head increases:
• Free discharge: 54,000 liters per hour
Rodpfx Aaszw U Nls Iscf
• At 5 meters: 49,500 liters per hour
• At 10 meters: 42,000 liters per hour
• At 20 meters: 27,000 liters per hour

The SEH series uses the more expensive and high-quality Honda engine.

Heavy-duty ballast pump for shipping, construction, etc.
Type: SE
Color: black
Pump type: self-priming centrifugal pump
Impeller type: open impeller
Engine type: 4-stroke HONDA gasoline engine
Shaft seal: mechanical seal of ceramic on carbon
Impeller material: cast iron
Impeller housing material: cast iron
Pump housing material: aluminum
Pump shaft material: stainless steel
Liquids: slightly contaminated water
At 10 meters: 42,000 liters per hour
At 15 meters: 36,000 liters per hour
At 20 meters: 27,000 liters per hour
At 25 meters: 9,000 liters per hour
Dimensions: lxbxh = 525 x 399 x 476 mm
Weight: 34 kg
Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline
Shaft power: 2.79 kW, 3.8 hp at 3600 rpm
Shaft power: 4.04 kW, 5.5 hp at 4000 rpm
Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.