Laser cutter

Kimla LASER FIBER KIMLA POWERCUT LF 1530 6 KW

KIMLA POWERCUT LF 1530 6 kW Fiber Laser manufactured in 2022 in Poland by POLCOM Przemysław Kimla.

Laser cutting is performed using a stable 6 kW fiber optic beam. The head includes a lens assembly ensuring optimal beam geometry for various component types. The entire machining process is supported by an automatic pallet exchange system, which allows for simultaneous loading and unloading of parts during cutting.

All linear axes (X, Y, Z) are powered by high-performance servo drives. Their innovative technology, based on real-time Ethernet data transmission, allows configuration of four motion parameters (position, speed, acceleration, and jerk).

The POWERCUT LF 1530 fiber laser is built on a rigid, monolithic frame. The gantry design draws inspiration from aerospace structures, prioritizing low mass and high rigidity.

Extensive equipment includes, among others, an interactive control system integrating CAD/CAM software and CNC control. Among the many advantages of this solution, the machine operator always has the ability to edit, correct, modify geometry, arrange, generate toolpath, and resume work. This system also features automatic nesting with production management modules.

The offered KIMLA POWERCUT tube and profile laser cutter was installed and commissioned in February 2023. Since then, the machine has operated for only 4,450 hours.

Technical Specifications of KIMLA POWERCUT LF 1530 Laser Cutter:

- Laser power: 6 kW
- X/Y/Z axis travel: 1500/3000/120 mm
- X/Y/Z axis feed rate: 180/180/70 m/min
- Maximum sheet dimensions: 3050 x 1550 mm
- Maximum sheet weight: 900 kg
- Max. rectangular profile cross-section: 100x100 mm
- Min. rectangular profile cross-section: 20x20 mm
- Maximum pipe diameter: 150 mm
- Minimum pipe diameter: 20 mm
- Table height: 850 mm
- Table exchange speed: 1 m/s
- Operating hours: 4450 h
- Air pressure: 7 bar
- Nitrogen pressure: 30 bar
- Oxygen pressure: 10 bar
- Power supply: 3x 400 V; 50 Hz
- Machine dimensions without additional devices (L x W x H): 4400 x 2800 x 2400 mm
- Machine weight: 10,000 kg

KIMLA Laser Cutting Machine Equipment:

- CNC controller
- CAD/CAM software
- Integrated system for cutting tubes and rectangular profiles
- Ability to cut with compressed air
- IPG laser source with safety module and power control system
- Pallet exchange system
- Automatic sheet position detection system and adaptive toolpath adjustment
- Dedicated parametric laser beam modulator for customizable modulation characteristics
- Automatic nozzle height control calibration
- Multi-chamber DONALDSON Torit DCE extraction system with pulse cleaning
- 20 kHz linear motors in all axes
- RENISHAW measuring scales
- Dual-sided gantry drive
- Multifunctional control panel
- Integrated cooling system with digital temperature stabilization
- Worktable with precision mechanical locking
- Gas supply system (oxygen and nitrogen) with pressure regulation and safeguards against pressure loss
- RJ45 port
Dcodpfx Afow N Il Ssnjn
- USB port
- Waste bins

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.