Tool milling machine

ISEL ISEL FLATCOM XL

4-Axis CNC Machining Center ISEL FlatCom XL142/112 EC-Servo – 10/2017
Bedpjycqm Eefx Abvecu
X1480 Y1090 Z617 – 3.6 kW spindle / 17,750 rpm (ER32) – 135.53 operating hours – 4th axis Ø600 L1000 – PC + remote control

Ready for use, can be seen powered on
Location: Industrial zone 06510 CARROS

Machining center / 4-axis CNC milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017,
Serial no.: 669371/1, CE marked.
Dimensions: length 2.80m – width 2.00m – height 2.32m
Machine in “as new” condition, very little use, fully tested.

Hours: 135.53 operating hours
144.04 powered-on hours
Axes: 4 axes, with 4th rotary axis (effective diameter 600 mm, length 1000 mm)
Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis)
Usable table: 1540 × 1500 mm – T-slot table
Transmission: ball screws, linear guideways
Drives: EC-Servo motors

SPINDLE / TOOLING
ISEL VKH75/26-75T spindle: 3.6 kW, 17,750 rpm
ER32 collet
Pre-equipped for pneumatic tool changer (ATC):
tool magazine not included, but can be added
(arrange through supplier)
2 tool holders (1 mounted on the machine)
Tool length probe included
Cooling: spindle air + included chiller

Control / PC / Software
ISEL control + REMOTE software
License included and transferable
No dongle/keys/codes required
PC + monitor + keyboard included (Windows 7)

WORKSHOP / SAFETY
Power supply: 400V three-phase, 16 A
Compressed air required: yes, 8 bar (for pneumatic components)
Dust extraction: not included
Lubrication: none
Enclosure with emergency stop
Noise level: approx. 50 dB max
Dust extraction port/connection prepared: no

Condition / Testing
Condition: “as new”, no known issues
(play, errors, sensors: nothing to report)
Last tested: 13/01/2026
All movements tested OK

Included
Machine + electrical cabinet
PC/monitor/keyboard
Software & license
4th rotary axis
2 tool holders + collets + clamping kit (Allen keys)
Various clamping accessories + tool length probe
Set of end mills / drills included (see photos)

Brand: ISEL
Model: FlatCom XL142/112 EC-Servo
Year: 10/2017
Serial number: 669371/1
Axes: 4 + 4th rotary axis (Ø 600 / L 1000)
Travels: 1480 × 1090 × 617 mm
Table: 1540 × 1500 mm, T-slots
Spindle: 3.6 kW – 17,750 rpm – ER32
Pre-equipped for pneumatic tool changer (ATC), magazine not included
Power: 400V three-phase – 16A / Air: 8 bar
Hours: 135.53 operating / 144.04 powered-on

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.