Tablet press

IMA Kilian Pressima 8 MX - EU - B / D

Tablet Press PRESSIMA – as new, in ex-works condition

Fully functional machine with complete documentation and software.
Gjdpfx Ajy Hl Aqjqisbr

Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter.

The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard.

Operation
• Suitable for small batch production
• Main compression force measurement with digital readout on the machine panel
• Digital display of parameters set via handwheels
• Note: No automatic control system available

Technical Data
• Speed: 10–75 rpm
• Max main compression force: 50 kN
• Pre-compression force: 10 kN
• Turret diameter: Ø 180 mm
• Two-wheel feeder, variable speed
• Drive motor: frequency controlled, 1.5 kW
• Power supply: 400–480 V, 50/60 Hz
• Total power consumption: 1.5 kW
• Machine housing and press area: stainless steel
• Press area unpainted, easy access, hard-nickel-plated surfaces
• Central extraction port
• Central manual lubrication pump for punches
• Automatic lubrication pump for punches and guideways
• Feeder motor integrated in the headpiece

Mechanics
• Handwheels for tablet thickness, main pressure, pre-compression, and fill
• Rotary flap between fill tube and feeder
• Solid pre-compression and main compression stations
• Scrapers on upper and lower punches
• Magnetic brakes on lower punches
• 12 mm fill shoe as standard
• Lower punch is lowered after dosing
• Lower guideway and ejection rail easily removable
• Machine status display on control panel

Measuring and Analysis System
• MS2300 for recording and analysis of up to 16 channels
• Measurement/analysis of:
o Main compression (upper)
o Main compression (lower)
o Pre-compression (upper)
o Ejection force
o Scraping force
o Upper and lower punch displacement
• Measuring amplifiers for main, pre-comp, ejection, and scraping force included

Equipment / Features
• Upper and lower punch shank bores with 4.8 mm keyways for guided tooling
• Chamber-type feeder
• Turret hard chrome plated
• Main compression force measurement incl. indicator on operator terminal
• Accessory kit type 8 MX:
o 4 EU-B blank dies
o 4 EU-D blank dies
o 4 plugs for EU-B/EU-D or TSM-B/TSM-D

Optional
• Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.