Diecasting machineIdra
NEO 1000
Diecasting machine
Idra
NEO 1000
سال ساخت
۲۰۲۳
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Brașov 

اطلاعات دستگاه
- نام دستگاه:
- Diecasting machine
- تولید کننده:
- Idra
- مدل:
- NEO 1000
- شماره دستگاه:
- 8935
- سال ساخت:
- ۲۰۲۳
- وضعیت:
- تقریباً نو (استفادهشده)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۱٬۲۰۰ h
قیمت و مکان
- موقعیت:
- Strada Poienelor 5, 500419 Brașov, Rumänien

تماس بگیرید
جزئیات فنی
- فاصله بین ستونها:
- ۱٬۰۰۰ میلیمتر
- نیروی ریختهگری:
- ۱٬۰۴۸٬۰۰۰ N
- ضربه پایانی (بستن):
- ۹۶۰ میلیمتر
- ارتفاع کل:
- ۴٬۳۰۰ میلیمتر
- عرض کل:
- ۴٬۵۰۰ میلیمتر
- طول کورس (ضربه):
- ۷۵۰ میلیمتر
- طول کل:
- ۱۰٬۷۰۰ میلیمتر
- قطر ستون:
- ۲۰۰ میلیمتر
- نیروی اجکتور:
- ۴۳۳٬۰۰۰ N
- ضربهٔ اجکتور:
- ۲۳۰ میلیمتر
- حداقل ارتفاع قالب:
- ۱٬۰۵۰ میلیمتر
- وزن کل:
- ۵۶٬۰۰۰ کیلوگرم
- نیروی گیرهگیری:
- ۱۱٬۱۶۸ کیلو نیوتن
- ظرفیت گرمایش:
- ۱۶۰ کیلووات (۲۱۷٫۵۴ اسب بخار)
جزئیات پیشنهاد
- شناسه آگهی:
- A22358307
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۸.۰۴.۱۴۰۵
توضیحات
IDRA NEO 1000 – Horizontal Cold Chamber Die Casting Cell (1,000 t class), Made in Italy
Complete high-pressure aluminum die casting cell built around the IDRA NEO 1000 machine, featuring the patented 5S regenerative injection system and DCP energy-saving hydraulics – up to 54% energy saving during accumulator recharge.
Machine & core systems:
5S regenerative injection – closed-loop, single-valve speed control, injection speeds up to 10 m/s, no cavitation, independent intensification cylinder for final pressure
DCP Drive Controlled Pump system – master/slave pumps, reduced motor size, accumulator charging independent of closing and core-pull
Idra Inject Computer IC 3.2 – Siemens S7-1500 PLC, 18.5" multi-touch supervision, 3D diagnostics, Industry 4.0 / OPC UA ready, Profinet decentralized architecture
Clamping unit – Block-Control "I" tie-bar monitoring with automatic clamping-force adjustment, laser-controlled sliding shoes, hydraulic die-height adjustment, automatic toggle lubrication
Central ejection & core-pull – 2-cylinder hydraulic ejection, multiple core-pull groups on fixed and moving platens, Squeeze Pin software
New servo-driven guarding system – full machine protection, faster movement, reduced wear
CE certified according to 2006/42/EC, complete documentation set
Iiedjzmmldjpfx Afaed
Cell periphery included:
KUKA KR 70 R2100 F extraction robot with gripper, 8-photocell part inspection and safety fence
Wollin AED 1000 LST2-B-GB linear sprayer, 1,600 mm telescopic arm, 6 spray + 2 blow circuits, FLT6 spraying tool with 52 spray heads
Fondarex FX Premium Mobile 700/63 vacuum system, 2 channels with per-channel curve monitoring and leak detection
TS 40 Robopress trimming press, 1000×1000 mm inside columns, 800 mm stroke, Z-conveyor
4 × Regloplas thermoregulation units – 2× 300LD oil (300 °C, 80 kW) + 2× P160LD pressurized water (160 °C)
Borries 315ARDMS marking device, 12-position casting cooling tower, good/bad part chutes, platforms with protective fence and power distribution cabinet
Price on request.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Complete high-pressure aluminum die casting cell built around the IDRA NEO 1000 machine, featuring the patented 5S regenerative injection system and DCP energy-saving hydraulics – up to 54% energy saving during accumulator recharge.
Machine & core systems:
5S regenerative injection – closed-loop, single-valve speed control, injection speeds up to 10 m/s, no cavitation, independent intensification cylinder for final pressure
DCP Drive Controlled Pump system – master/slave pumps, reduced motor size, accumulator charging independent of closing and core-pull
Idra Inject Computer IC 3.2 – Siemens S7-1500 PLC, 18.5" multi-touch supervision, 3D diagnostics, Industry 4.0 / OPC UA ready, Profinet decentralized architecture
Clamping unit – Block-Control "I" tie-bar monitoring with automatic clamping-force adjustment, laser-controlled sliding shoes, hydraulic die-height adjustment, automatic toggle lubrication
Central ejection & core-pull – 2-cylinder hydraulic ejection, multiple core-pull groups on fixed and moving platens, Squeeze Pin software
New servo-driven guarding system – full machine protection, faster movement, reduced wear
CE certified according to 2006/42/EC, complete documentation set
Iiedjzmmldjpfx Afaed
Cell periphery included:
KUKA KR 70 R2100 F extraction robot with gripper, 8-photocell part inspection and safety fence
Wollin AED 1000 LST2-B-GB linear sprayer, 1,600 mm telescopic arm, 6 spray + 2 blow circuits, FLT6 spraying tool with 52 spray heads
Fondarex FX Premium Mobile 700/63 vacuum system, 2 channels with per-channel curve monitoring and leak detection
TS 40 Robopress trimming press, 1000×1000 mm inside columns, 800 mm stroke, Z-conveyor
4 × Regloplas thermoregulation units – 2× 300LD oil (300 °C, 80 kW) + 2× P160LD pressurized water (160 °C)
Borries 315ARDMS marking device, 12-position casting cooling tower, good/bad part chutes, platforms with protective fence and power distribution cabinet
Price on request.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین حضور آنلاین: دیروز
ثبت شده از: 2026
۱۶ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+40 722 2... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است


























