3500 liter heatable/coolable pressure tank made of V2A

Iaeg 7733

GENERAL INFORMATION
Features: Crane lifting lugs
Design: Vertical
Remarks: Armaflex insulation on the lid and upper cylinder area (see photos)
Speed: 395 rpm
Outer diameter: 1,660 mm
Inner diameter: 1,580 mm
Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified)
Overall height: 4,550 mm
Heating/cooling: available
Power: 6.8 kW
Max. permissible operating temperature: 15 °C
Max. permissible operating overpressure: 4.0 bar
Maximum overpressure: 4.00 bar
Mechanical seal: Mechanical seal with thermosiphon vessel
Agitator: Propeller
Support type: Feet
Location: Bremen
Cylinder temperature control: Double jacket
Nameplate:
Vacuum: 1.00 bar
Volume: 3,500 liters
Double jacket volume: 320.0 liters
Product-contact material: V2A 1.4541 (AISI321)
Condition: Used
Cylindrical height: 1,700 mm
Last application: Chemicals

TANK
Max. permissible operating temperature: 120 °C
Number of feet: 4 pcs.

HEATING/COOLING JACKET
Bottom temperature control: Double jacket
Ljdpfx Ajxqa Uyjfhjrg

EQUIPMENT
Outlet: Flange DN50
Note: Slight residues

MATERIAL SPECIFICATIONS
Temperature control system material: V2A 1.4541 (AISI304)
Foot material: Steel

AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400/690 volts
Agitator arrangement: Eccentrically mounted on the top head
Agitator features: Protective cover over the motor hood is bent

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.