Belt conveyor for dosing barsHeumader
Belt conveyor for dosing bars
Heumader
VB به اضافه مالیات بر ارزش افزوده
€۱۵٬۰۰۰
سال ساخت
۲۰۲۳
وضعیت
کارکرده
موقعیت
Wien 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Belt conveyor for dosing bars
- تولید کننده:
- Heumader
- شماره دستگاه:
- 22023.0202.1000
- سال ساخت:
- ۲۰۲۳
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۱۵٬۰۰۰
- موقعیت:
- Kohlmarkt 8-10, 1010 Wien, AT
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19995385
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۵.۰۶.۱۴۰۴
توضیحات
Overall length approx. 2300 mm
Nominal width approx. 350 mm
Total width with motor approx. 500 mm
Belt upper edge adjustable from 980 to 1080 mm
Undercarriage made of robust box section profiles
Design in stainless steel, material 1.4301
Knife edge on both sides, radius approx. 5 mm
Food-grade conveyor belt, make: Habasit, color: white
Central drive station
Gear motor, make: SEW, included
Food-safe coating (depending on lead time)
Speed adjustable via frequency converter (between 0.8 - 8 m/min)
Including adjustment frame for 5 dispensers by Viscotec
Adjustment is primarily via profiles and clamping units
Height adjustment carried out manually via clamping units, all dispensers are adjusted simultaneously. Fine adjustment of the dispensers can be carried out individually via elongated holes, if necessary. Each dispenser can be adjusted laterally, in inclination, and in/conveying direction independently. Without side guides
Includes engineering
Pre-assembly included
Installation of dispenser included at our facility
In-house testing included
Surface: Conveyor in stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units made of aluminum
5 bars are transferred from an existing conveyor system onto our conveyor belt
Control cabinet made of stainless steel 1.4301
Control and frequency converter by Mitsubishi Electric
Configuration:
Main switch, emergency stop switch, automatic on/off buttons
Display for setting speed in m/min and adjusting the delay time for the dispenser start signal
Sensors for bar detection (each bar is detected individually)
Sensors and signal for dispenser start (each dispenser receives its own start signal)
Communication interface with Viscotec
Emergency stop currently only for our own machine.
Including control cabinet construction with 50% spare capacity
Including high-grade sensors (distance photoelectric sensors capable of measuring and evaluating distance)
Including high-end control (hardware and software can be expanded at any time without the need to replace the controller)
Including HMI (display), approx. 7" size
Including E-Plan
Including program
Including in-house test (interface test with Viscotec)
Iodpfx Acexch D Hsyoih
Surface: control cabinet fully in stainless steel, sensors in stainless steel and FDA-approved.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Nominal width approx. 350 mm
Total width with motor approx. 500 mm
Belt upper edge adjustable from 980 to 1080 mm
Undercarriage made of robust box section profiles
Design in stainless steel, material 1.4301
Knife edge on both sides, radius approx. 5 mm
Food-grade conveyor belt, make: Habasit, color: white
Central drive station
Gear motor, make: SEW, included
Food-safe coating (depending on lead time)
Speed adjustable via frequency converter (between 0.8 - 8 m/min)
Including adjustment frame for 5 dispensers by Viscotec
Adjustment is primarily via profiles and clamping units
Height adjustment carried out manually via clamping units, all dispensers are adjusted simultaneously. Fine adjustment of the dispensers can be carried out individually via elongated holes, if necessary. Each dispenser can be adjusted laterally, in inclination, and in/conveying direction independently. Without side guides
Includes engineering
Pre-assembly included
Installation of dispenser included at our facility
In-house testing included
Surface: Conveyor in stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units made of aluminum
5 bars are transferred from an existing conveyor system onto our conveyor belt
Control cabinet made of stainless steel 1.4301
Control and frequency converter by Mitsubishi Electric
Configuration:
Main switch, emergency stop switch, automatic on/off buttons
Display for setting speed in m/min and adjusting the delay time for the dispenser start signal
Sensors for bar detection (each bar is detected individually)
Sensors and signal for dispenser start (each dispenser receives its own start signal)
Communication interface with Viscotec
Emergency stop currently only for our own machine.
Including control cabinet construction with 50% spare capacity
Including high-grade sensors (distance photoelectric sensors capable of measuring and evaluating distance)
Including high-end control (hardware and software can be expanded at any time without the need to replace the controller)
Including HMI (display), approx. 7" size
Including E-Plan
Including program
Including in-house test (interface test with Viscotec)
Iodpfx Acexch D Hsyoih
Surface: control cabinet fully in stainless steel, sensors in stainless steel and FDA-approved.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2025
ارسال درخواست
تلفن & فکس
+43 688 6... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است