Machining center

HERMLE C 400

TECHNICAL DETAILS
X-axistravel : 850 mm
Y-axis travel: 700 mm
Z-axis travel: 500 mm
Controltype: Heidenhain TNC 640

Rapid traverse linearXYZ: 35 - 35 - 35 m/min
Acceleration linearXYZ: 6 m/s²
Feed force linearXYZ: 7,000 N
jaw widthmax.: 625 mm

workpiece dimensions
Max. diameter: Ø 650 mm
Height max.: 500 mm
Interference circle (A-axis) in 0° position: Ø 885 mm

spindle data
Speed: 15,000 rpm
Power/torque: 20% ED, 20 kW / 173 Nm
Tool holder: SK 40

tool interface
Type: SK 40
Magazine slots: 38 pieces
Chip-to-chip time: approx. 6 s
Tool length: max. 300 mm
Tool diameterfor adjacent space occupancy: Ø 80 mm
Tool diameter without adjacent space occupancy: Ø 125 mm
Tool weight: max. 8 kg
Magazine load: max. 152 kg

swivel rotary table
clamping surface: Ø 650 x 540 mm
Swivel range: +91° / -139°
Drive type C-axis: worm
Speed of swivel axis A: 25 rpm
Speed of rotation axis C: 30 rpm
Table loadSingle-sided drive: 600 kg

accuracy according to ISO 230-2
Deviation (A in XYZ axis): ≤ 0.006 mm

cooling system (IKZ)
Standard tank capacity: 122 l
Cooling lubricant tank capacity: max. 570 l at 40 bar
Pressure: max. 40 bar
Flow rate: 11/27 l/min
Mains connection (IKZ): 400 V / 50/60 Hz
Power consumption (IKZ): up to 20 kVA
Filter: Police filter, paper band filter

operating pressure
Hydraulic pressure: 120 bar
Compressed air: 6 bar

Lubrication system: minimum quantity grease lubrication

MACHINE DETAILS
Control switch-on time: 20,178 h
Machine on-time: 19,094 h
Spindle time: 11,832 h
Weight: approx. 9.5 t

power connection
Voltage: 400 V / 50/60 Hz
Power consumption: up to 30 kVA

EQUIPMENT
- BLUM measuring probe
- BLUM tool laser measurement
- Pull-out chip drawer
- swivel rotary table
- chip flushing gun
- emulsion mist extraction
- scraper belt conveyor
- blow-off device
- Blowing air through the spindle center
- Manual cabin door
- Manual cabin roof
- Polycarbonate safety windows
- Electrical heat compensation from Heidenhain.
- Electric hand control module from Heidenhain.