HERMLE C 1200

HERMLE C 1200

This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details.

• X – 1200 mm
• Y – 900 mm
• Z – 500 mm
• Machining Center C 1200 V
• Heidenhain iTNC 530 contouring control
• Spindle 16,000 rpm
• SK 40
• 30 Tool Stations
• Rigid Clamping Table
• Coolant System
• Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base
• Portal design with a closed rear wall for significantly better support during torsional loads
• Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates
• Feed screw diameter and pitch (X and Z axes): 40 / 20 mm
• Feed screw diameter and pitch (Y axis): 50 / 20 mm
• Direct measuring system
• Resolution: 0.0001 mm
• Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm
Rjdpfoylw Stox Am Decb
• Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C
• Flushing/wash-down system for rinsing the side work area
• Display: 15" TFT color flat screen
• Flexible contour programming
• Part program memory
• Tool diameter capacity: 80 mm
• Tool diameter with free adjacent slots: 125 mm
• Maximum tool length: 300 mm
• Maximum tool weight: 8 kg
• Maximum magazine load: 120 kg
• Chip-to-chip tool change time according to VDI 2852: 6.5 seconds
• Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch
• Machine on – 11,927 h
• Spindle on – 9,192 h

Additional equipment

• Chip conveyor
• Heidenhain touch probe
• Electronic Manual Control Module (iTNC)

Technical Specification
Taper Size SK 40