Curing chamber with UV protection box II 97307

Henkel UVALOC 400 Loctite 97039

Henkel
UVALOC 400 Loctite 97039 Curing Chamber
The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light.
Bwedpfszg Expex Ak Eop
It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use.
The device integrates the following:
a control unit with an integrated power switch and operating hour counter
a lamp housing with the burner
reflector
igniter.
Includes a UV protection box.
Features:
Contains a 400 W metal halide lamp
Optimized for light emission in the UVA range
Typical curing area 10 x 19 cm
Expected UV lamp life up to 1000 hours
The power supply can be detached from the lamp module and operated separately
Adjustable lamp height for optimal irradiation
With a glass filter to prevent short-wave UVB/UVC emission
Technical data:
Mains connection 230 V AC ± 4%, 50 Hz
Power consumption approx. 460 W
Mains fuse 2 x 5 A, slow-blow
Glass tube fuse 5 x 20 mm
Warm-up time of the UV lamp 3 minutes
Lamp type 400 W high-pressure metal vapor lamp with double-ended base
Lamp life approx. 1000 hours
Intensity See section 5.1
Dimensions (width x height x depth): 220 mm x 472 mm x 300 mm
Ambient and operating temperature +10 °C ... +30 °C
Storage temperature -10 °C ... +60 °C
Weight ~ 11.5 kg
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data and information are subject to change!)
We will be happy to answer any further questions you may have by phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.