Curing chamber with UV protection box II 97307

Henkel UVALOC 400 Loctite 97039

Handle
UVALOC 400 Loctite 97039 Curing Chamber
The UVALOC 400 curing chamber (LOCTITE 97039) is a surface jet curing system,
developed for curing light-curing adhesives with UVA rays and visible light.
It is suitable for manual curing of individual parts during the production process as well as for laboratories.
The following is integrated in the device
a control unit with integrated mains switch and operating hours counter
a lamp housing with the burner
reflector
ignitor.
In with UV protection box
Features:
Contains 400 W metal halide lamps
Optimized for light emission in the UVA range
Typical curing area 10 x 19 cm
Expected service life of the UV lamp up to 1000 h
The power supply unit can be detached from the lamp module and operated separately
Adjustable lamp height for optimum irradiation
With glass filter to avoid short-wave UVB/UVC emission
Technical data:
Mains connection 230 V AC ± 4%, 50 Hz
Power consumption approx. 460 W
Codpfetv H A Tox Afnjrh
Mains fuse 2 x 5 A, slow-blow
Glass tube miniature fuse 5 x 20 mm
Warm-up time of the UV lamp 3 minutes
Lamp type 400 W high-pressure metal vapor lamp with base on both sides
Lamp life approx. 1000 hours
Intensity See section 5.1
Dimensions (width x height x depth): 220 mm 472 mm 300mm
Ambient and operating temperature + 10 °C ... + 30 °C
Storage temperature - 10 °C ... + 60 °C
Weight ~ 11.5 kg
Condition: gebraucht / used
Scope of delivery: (see picture)
(Subject to changes and errors in the technical data and specifications!)
We will be happy to answer any further questions you may have on the phone.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.