Horizontal machining center

HELLER MCH 250

CNC machining center - horizontal
Manufacturer: HELLER
Machine model: MCH 250
Control: Siemens 840 D – Powerline
Year of construction: 2006

TECHNICAL DATA
- X-axis mm 800
- Y-axis mm 800
- Z-axis mm 800
Travel range along the center of the table, X-axis mm +400 to -400
Travel range vertically above the pallet clamping surface, Y-axis mm +120 to +920
Travel range transversely to the center of the table, Z-axis mm +150 to +950
Feed forces
- X-axis at ED S3 – 40% N 15000
Bljdpfx As Agvffopnep
- Y-axis at ED S3 – 40% N 15000
- Z-axis at ED S3 – 40% N 17500
Speeds
- Feed rate in X, Y and Z axes mm/min 1-50000
- Rapid traverse speed mm/min 50000
- Acceleration in X, Y and Z axes m/s² 4.0
- B-axis (360 x 1° rotary table) max. speed 1/min 25
Rotary table
- Division degrees 360 x 1
- max. permissible clamping weight daN 800
- Max. tangential moment Nm 20000
- max. tipping moment Nm 18000
Spindle
- Speed range 1/min 45 – 6000
- Tool holder DIN 69893 HSK 100 Form A
- Motor Three-phase spindle motor
- Drive power max. at the spindle at ED S1 - 100% kW 40
-- at ED S6 - 40% kW 60
-- at ED S6 - 25% kW 70
--- from speed 1/min 500
- Torque max. at the spindle at ED S1 - 100% Nm 765
-- at ED S6 - 40% Nm 1145
-- at ED S6 - 25% Nm 1340
-- up to speed 1/min 500
Tool magazine
- Magazine type Rack
- Magazine places incl. 2 x 7 setup positions 405 places
- Magazine places for max. tool diameter 23 places
Pallet changing device
- Pallet size mm 630 x 630
- Workpiece dimensions: Swiveling diameter in the working area x height mm Ø900 x 1000
- Pallet changing accuracy in X, Y and Z axes mm 0.01
- Pallet changing time at 500 (800) daN s 12 (14)
- Rotary storage RSP 4-fold
- Pallets in the system, number 6

EQUIPMENT FEATURES
+ Coolant system
++ with vacuum rotary filter - high pressure 50 bar (Knoll VRF 250)
++ Coolant tank capacity l 1500
++ Coolant pump 3 bar flow rate l/min 170
++ Coolant pump 2 bar flow rate l/min 40
++ High-pressure pump 70 bar flow rate l/min 22
+ Chip removal
++ Conveyor spirals in the machine bed number 2
++ Diameter mm 160
++ Transverse chip conveyor
++ Conveyor speed m/min 1.5
++ Discharge height mm 1200
+ Rotary storage RSP 4-fold
+ Pallets in the system, number 6
+ Integrated tool monitoring IPM
+ Drill breakage control
+ Measuring probe Renishaw
+ Status lamp 3 colors
+ Remote diagnostics via modem

Machine weight daN 19000
Space requirement basic machine L x W x H approx. m 6.3 x 4.9 x 4.0
Power requirement basic machine kVA 85
Maximum power requirement (including all options) kVA 131

Subject to changes and errors in technical data and specifications.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.