2011 Hardinge GX 1000

Hardinge GX 1000

Used 2011 Hardinge plied with 8000 RPM Spindle, 30 station ATC, Swarf conveyor, coolant equipment & manual set.

SPECIFICATION:

TRAVELS:

X Axis 1020 mm, Y Axis 540 mm, Z Axis 540 mm

Spindle Nose to Table (~ max) 685 mm, Spindle Nose to Table (~ min) 145 mm

TABLE:

Length 1120 mm, Width 540 mm

T-Slot Width 18 mm, T-Slot Centre Distance 160.0 mm, Number of

Std T-Slots 3 Max Weight on Table (evenly distributed) 700 kg

SPINDLE:

Max Rating 17.4 hp 13 kW, Max Speed 8,000 rpm, Max Torque

82.76 Nm, Drive System Direct Speed Belt Drive, Taper
Dodsvq Ry Dspfx Ag Iecr

BT 40, Bearing Lubrication Air/Oil Injection Cooling Air Cooled

FEEDRATES:

Rapid and Jog (Max.) 36 m.min

Cutting Feed Rate (Max.) 12 m.min

AXIS MOTORS:

Axis Motor Rating X Y Z - 2.29 12,29 3.3 KW

TOOL CHANGER:

Type Carousel, Capacity 20

Max tool diameter 89 mm

Tool length Max. 250 mm

Tool weight Max. 6 kg

Tool change time 6 sec

GENERALS:

Air Required 4 scfm, 700 psi /min

Power supply 45A FLA / 400 v / 3 phase

Coolant

Capacity 360 L
Control: Siemens 828D
Spec: Travel X 1020 Y 540 Z 540 mm | Max spindle RPM 8,000 | BT40
Accessories: Swarf conveyor, Coolant equipment, 20 tool ATC