Vertical machining center

Haas VF-4 - 4./5. Achse Paket

Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours.

The machine is in excellent optical and technical condition.

The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed:
- Axis cards for the 4th and 5th axes
- Dynamic workpiece offset
- Tool center point control
- High-speed machining
- Programmable coolant nozzle
- Wireless Renishaw measuring probe and tool probe
Itjdoy Tp E Aopfx Afaei

In addition, the machine is unusually well-equipped:
- TSC – internal coolant supply with 21 bar
- Spiral chip conveyor
- Complete coolant maintenance package (automatic replenishment, oil separator, mist collector)
- Fast 30+1 tool changer
- Spindle with 10,000 rpm

The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring.
This makes the machine immediately ready for demanding machining tasks.

The original transport securing devices are available. An original Haas tool cart for SK40 is also included.

Inspection and demonstration under power are possible at any time by appointment.
Loading and transport can be arranged.

A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply.

Technical data:
- Travel ranges X / Y / Z: 1,270 × 508 × 635 mm
- Spindle nose to table: 107 – 742 mm
- Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg
- Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled
- Drive power: 22.4 kW
- Max. torque: 122 Nm at 2,000 min⁻¹
- Rapid traverse X / Y / Z: 25.4 m/min
- Feed rate max.: 16.5 m/min
- Tool changer: Side SMTC, 30+1 positions
- Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg
- Tool change time (chip-to-chip): approx. 3.6 s
- Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed)
- Compressed air: approx. 113 l/min at 6.9 bar
- Coolant tank: 208 l
- Weight: approx. 6,260 kg (with conveyor)

Control:
- Haas Next Generation Control with touchscreen
- 1 GB program memory, Ethernet + WLAN
- HaasConnect (remote monitoring), HaasDrop (wireless file transfer)
- M130 media display, safe run, synchronized thread drilling
- Early detection module for power failure, overvoltage protection
- Equipment / options (all installed from the factory)
- 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle)
- Wireless Renishaw measuring probe system (intuitive)
- TSC – internal coolant supply through the spindle, 21 bar
- Spiral chip conveyor
- Coolant maintenance package (automatic replenishment, oil separator, mist collector)
- Additional coolant filter (bag filter 25 µm)
- Filter set for chip sump (200 µ)
- Variable coolant flow (M-code controlled)
- Blowing of the inside of the machine door
- Lifting eyes, touchscreen, door lock

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.