Vertical machining center - 4th axis

HAAS VF-2SS

The machine is in good technical condition, and an inspection while running can be arranged. Includes a 4th axis.
Work area and table:
Table dimensions: 914 × 356 mm
Travel in the X-axis: 762 mm
Travel in the Y-axis: 406 mm
Travel in the Z-axis: 508 mm
Blodpfjznx Nwjx Afhjk
Distance from the spindle nose to the table: 102 to 610 mm
Maximum table load: 680 kg
Spindle (Super Speed specification)
Spindle taper: ISO 40 (Inline Direct-Drive)
Maximum spindle speed: 12,000 rpm
Spindle motor power: 22.4 kW (30 HP)
Torque: 122 Nm at 2000 rpm
Tool changer (ATC)
Changer type: Rapid side-mount tool changer
Changer capacity: 24+1 positions (optionally 30+1)
Tool change time (tool-to-tool): approx. 1.8 seconds
Feeds and drives
Rapid traverse rates in X, Y, and Z axes: 35.6 m/min (compared to 25.4 m/min for the standard VF-2 version)
Maximum working feed rate: 21.2 m/min
Guide type: Linear ball bearings in all axes
Dimensions and weight
Machine footprint (W × D × H): approx. 2.51 × 2.36 × 2.57 m (height depends on the Z-axis elevation)
Machine weight: approximately 3,540 kg

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.