Steel Frame Automatic Nailing Bridge

H&M

Steel Frame Automatic Nailing Bridge

A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions:

​

1. Nailing or stapling of sheeting

2. Routing of openings or overhangs

3. Application of breather membrane

4. Nailing or stapling of battens

​

Specification



Full PC control with 17” touch screen Interactive display of operation being performed

Automatic download from drawing software.

Heavy duty tables with one fixed side and one moving side

90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished

1300mm minimum panel height

Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m

400mm wide heavy duty work tables 825mm working height

300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking



Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek.

Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area

Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position.

Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table.

Optional router unit with 4kw motor - servo drive controlled



Optional Equipment

​

Table with rails mounted for bridge

Additional price per meter for table with rails mounted

Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail

Working table for holding panel 6m (no rails mounted) Additional price per meter for table

Motorised chains rather than manual rollers - initial cost Price per meter for motorisation

Baton positioning guiding arrangement Additional tool mount

Paper roll clamp, holder and software Electric paper cutting
Credpedzc Rxofx Amaoi

Panel thickness of 500mm

Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness.

Inclination of the sawblade to one fixed angle

Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels.

Complete with software controls and dust extraction.