Machine for testing bevel gears

Gleason 500 HCT

5-Axis CNC Hypoid Bevel Gear Tester – Flank to Flank
Manufacturer: GLEASON PHOENIX
Model: 500 HCT
Year of Manufacture: 10/1998 – Installed mid-1999
CNC Controller: FANUC

Capacity – Bevel/Hypoid Gears:
- Maximum Gear Outside Diameter: 508 mm
- Maximum Pinion Outside Diameter: 300 mm
- Pinion Offset: 500 mm
- Gear OD above center: 127 mm
- Gear OD below center: 51 mm
- Pinion Offset: 250 mm
- Gear OD above center: 124 mm
- Gear OD below center: 127 mm
- Shaft Angle (without reverse mounting): 85° to 180°
(with reverse mounting): 0° to 180°
Gsdpew Ec Uzsfx Agmsbg
- Gear spindle nose to pinion axis: min. 51 mm – max. 305 mm
- Pinion spindle nose to gear axis: min. 394 mm – max. 394 mm

Capacity – Cylindrical Gears:
- Center Distance: min. 25 mm – max. 305 mm
- Distance between spindle faces (b = 0°): min. 165 mm – max. 419 mm

Machine Axes Travels:
- Max. Shaft Angle Travel (B-Axis): 85° to 180°
- Max. Vertical Travel (Y-Axis): -127 mm to 127 mm
- Max. Horizontal Travel (X-Axis): 140 mm to 394 mm
- Sliding Base Travel (Z-Axis): 51 mm to 305 mm
- Machine Center to Work Spindle Face (fixed): 114 mm

Pinion Spindle:
- Large End Tapered Hole Diameter: 3 29/64″ (#39 taper)
- Taper per Foot
- Taper Depth: 3″
- Chucking Force: 4,500 to 6,000 psi
- Spindle Speed Range – Single Flank Testing (SFT): 15 to 2,500 RPM
- Spindle Speed Range – Roll Testing & SBN: 15 to 3,000 RPM

Gear Spindle:
- Large End Tapered Hole Diameter: 3 29/64″ (#39 taper)
- Taper per Foot: 39/64″
- Taper Depth: 3″
- Chucking Force: 4,500 to 6,000 psi
- Spindle Speed Range – Roll Testing & SBN: 15 to 1,500 RPM
- Spindle Speed Range – Single Flank Testing (SFI): 15 to 1,250 RPM
- Brake Load – Conventional Testing: 69 Nm
- High Torque Testing: 100 Nm

Approx. Machine Weight: 8,200 kg
Electrical Load: 16.7 kW (Peak)
Compressed Air: 17 m³/hr (approx.), 4.9 bar

The machine is in excellent condition and complete with all components and accessories.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.