Gantry milling machine

Fooke Endura 905 Linear

First commissioning: 2008

Control system: Heidenhain iTNC 530 incl. handwheel HR420
Fedpfx Aszkuiroc Depi

X-axis: approx. 5,000 mm
Y-axis: approx. 3,000 mm
Z-axis: approx. 1,750 mm
A-axis: -120 / +95°
C-axis: ± 360°

Maximum workpiece size
3,800 mm (X-direction)
1,800 mm (Y-direction)
1,150 mm (Z-direction)
Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool.

Machine operating hours: approx. 83,000 h
Total spindle hours: approx. 37,000 h

Machine bed (can be installed flush or above ground!)
Dimensions: 5,000 x 2,250 x 300 mm
- manufactured from EN-GJL-250
9 T-slots according to DIN 650-28H12 with a spacing of
250 mm and 125 mm from the edge

2-axis milling head, inspected by the manufacturer!
Spindle power: 20 kW
Spindle speed: max. 20,000 min-1
Torque: max. 63 Nm
Tool holder: HSK 63A
Tool clamping: hydraulic
Holding torque (clamped) A & C axis: 2,000 Nm

Drive system for linear axes
Feed rate X, Y, and Z axes: up to 65 m/min
Axis acceleration X, Y, and Z axes: up to 5 m/s2

Connection data
Voltage: 400 V
Frequency: 50 Hz
Power consumption: 130 kW

Dimensions, weights
Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm
Total weight: approx. 90,000 kg

Color
Enclosure, portal, control cabinet: RAL 7035 light gray
Milling head and applications: RAL color 5002 aquamarine blue

Additional equipment
- Minimum quantity lubrication
- 50-position tool changer
- Work area cover

Condition of the machine
The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional.
Completely new machine bed from Stolle!
The additional modules shown on the machine bed are not included in the scope of delivery.
The extraction systems and ducts shown are also not included in the scope of delivery.
The previous owner was an established Formula 1 team from Central Europe.
The machine was always under a maintenance contract with the manufacturer.
Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.