Welding fume extractionESTA
SRF-K15 FM
Welding fume extraction
ESTA
SRF-K15 FM
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱٬۸۰۰
وضعیت
کارکرده
موقعیت
Zdziechowice 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱٬۸۰۰
- موقعیت:
- Zdziechowice 167 Zdziechowice, 46-310 Gorzów Śląski, PL

تماس بگیرید
جزئیات فنی
- ظرفیت مکش:
- ۱٬۶۰۰ متر مکعب/ساعت
- فشار منفی:
- ۲٬۸۰۰ Pa
جزئیات پیشنهاد
- شناسه آگهی:
- A16138490
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۹.۰۹.۱۴۰۳
توضیحات
Mobile station welding fume extractor, dust extractor , filter
Njdpfx Adotpui Ievown
ESTA SRF K-15 FM
Fan of 2.2 Kw (three-phase) located on the clean side
Extraction arm with a range of 3 m
Capacity 1600 m3/h
Vacuum pressure 2800 Pa
Possibility to connect a second extraction arm( inlet 2 x 140mm)
SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants.
Welding or soldering fumes are filtered with a filtration efficiency of 99.9%.
The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge.
During welding, the device does not need to be connected to the compressed air network and thus remains mobile.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Njdpfx Adotpui Ievown
ESTA SRF K-15 FM
Fan of 2.2 Kw (three-phase) located on the clean side
Extraction arm with a range of 3 m
Capacity 1600 m3/h
Vacuum pressure 2800 Pa
Possibility to connect a second extraction arm( inlet 2 x 140mm)
SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants.
Welding or soldering fumes are filtered with a filtration efficiency of 99.9%.
The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge.
During welding, the device does not need to be connected to the compressed air network and thus remains mobile.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2018
ارسال درخواست
تلفن & فکس
+48 34 30... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است















