Bed type milling machine

EMMEGI S.p.A., Italien DIAMANT XL 7700

EMMEGI DIAMANT XL 7700 – CNC Profile Machining Center – 4 Axes – Year of Construction 2013

Manufacturer: EMMEGI S.p.A., Italy
Model: DIAMANT XL 7700
Machine Type: CNC Profile Machining Center
Year of Construction: 2013
Serial Number: C114811
Control System: CNC control system with 15-inch TFT color display
Number of Axes: 4 CNC-controlled axes

Technical Data

Travel Distances and Axes

* Number of CNC-controlled axes: 4
* Travel distance X-axis (longitudinal): 6,500 mm
* Travel distance Y-axis (transverse): 1,095 mm
* Travel distance Z-axis (vertical): 800 mm
* Swivel range A-axis: 0° to 180°, continuous
* Rapid traverse rate X-axis: 80 m/min
* Rapid traverse rate Y and Z axes: 64 m/min
* Rapid traverse rate A-axis: 10,000 °/min
* Positioning accuracy over 1,000 mm: ±0.15 mm

Milling Spindle and Tool Holder

* Main spindle power S1: 7.5 kW
* Maximum spindle speed: 20,000 rpm (HSK F63)
* Up to 24,000 rpm with ISO 30 according to technical documentation
* Tool holder: HSK F63 / ISO 30 depending on configuration
* Tool magazine: 9 positions with HSK F63 or 10 positions with ISO 30
* Tool change time: under 16 seconds (HSK F63), under 18 seconds (ISO 30)

Tool Dimensions

* Maximum milling/drilling tool diameter: 63 mm
* Maximum tool length: 168 mm
* Disc milling cutter HSK F63: up to Ø 250 mm
* Disc milling cutter ISO 30: up to Ø 180 mm

Clamping System and Work Areas

* 2 independent work areas on the X-axis
* 6 clamping devices as standard
* Optionally up to 12 clamping devices
* Automatic positioning of the clamping devices
* 2 stops in standard design
* Optionally up to 4 stops

CNC Control and Software according to technical documentation

* CNC configuration: Pentium 3, 1 GHz, 256 MB RAM
* Display: 15-inch TFT color display
* Keyboard
* 2 COM interfaces
* 2 USB interfaces
* Network interface
* Operating system according to documentation: Windows 2000 Professional
* Software: CAM, Editor, Drill
* CAMPUS software included according to documentation

Rcjdpfx Abe Af U Aisneh
Electrical and General Data

* Year of construction: 2013
* Voltage according to nameplate: 400 V, 3 phases, 50 Hz
* Connected power according to nameplate: 25 kW
* Rated current according to nameplate: 36 A
* Weight according to nameplate: approx. 7,000 kg
* Operating pressure, compressed air: 6 bar
* Air consumption per cycle: 165 l/min

Equipment

Visible in the machine photos:

* CNC control panel with screen and keyboard
* Separate hand-held operating unit
* Automatic clamping system with multiple profile clamps
* Enclosed machining area with protective cladding
* Long bed for profile machining
* Emergency stop switch
* Pneumatic connections

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.