EMCO MAXXMILL 500

EMCO MAXXMILL 500

This 5-axis EMCO MAXXMILL 500 was manufactured in 2016. It features a maximum spindle speed of 15,000 rpm and a tool magazine capacity of 40 tools, allowing for efficient machining operations. The machine includes a swivelling-rotary table with a clamping area of 600 x 600 mm and a maximum workpiece size for 5-side machining of 500 x 500 x 475 mm. If you are looking to get high-quality milling capabilities, consider the EMCO MAXXMILL 500 vertical machining centre. Contact us for further details.

• B-axis (tilting): ±100°
• C-axis rotation: 0–360° continuous
• Rapid traverse X/Y/Z: 30 m/min
• Max rotational speed B/C axes: 25 rpm / 25 rpm
• Spindle nose to table distance: 150–650 mm
• Max acceleration X/Y/Z: 3 m/s²Main spindle
• Max torque: 100 NmWorking table
• Type: Swivelling-rotary table
• Clamping area: 600 × 600 mm
• Max workpiece size for 5-side machining: 500 × 500 × 475 mm
• T-slots: 5
• T-slot spacing: 100 mm
• Table-to-floor distance: 776 mmTool changer
• Magazine type/capacity: Drum magazine, 40 tools
• Tool change system: Double-gripper arm
• Tool-to-tool time: 2 s
• Max tool diameter: 80 mm (125 mm without adjacent tools)
• Max tool length: 250 mm
• Max total magazine load: 100 kg
• Tool management: RandomAccuracy (manufacturer nominal)
• Positioning accuracy X/Y/Z: 8 µm
• Repeatability X/Y/Z: 3 µm
• B-axis positioning accuracy: ±20 arcsec
• C-axis positioning accuracy: ±10 arcsecCoolant system
• Tank capacity: 250 L
Bedpfxe Ah H Nqo Agtsww
• Standard pump pressure: 2 bar
• Max flow at 2 bar: 40 L/minCondition, refurbishment, and status
• Comprehensive refurbishment by specialist:
• Complete refurbishment and installation/adjustment of swivelling-rotary table
• Extensive cleaning and reconditioning
• Installation and setup of workpiece and tool measurement probes
• Automatic kinematic calibration (KINEMATIC AUTO)
• Brand-new main spindle installed
• Machine connected to power and operational
• Milling test possible

Additional equipment

• Automatic workpiece probe
• Laser tool measurement system
• Through-spindle coolant system, 20 bar
• Chip conveyor (chip discharge height: 1,100 mm)
• Linear scales on X, Y, Z
• Automatic machine door
• Automatic kinematic system (KINEMATIC AUTO)
• Oil supply for machining fixtures via rotary joint at table centre
• Spare spindle available (inclusion in sale to be confirmed)

Technical Specification
Taper Size ISO 40