CNC milling machine
EMCO Concept Mill 55

سال ساخت
۲۰۱۶
وضعیت
کارکرده (کاملاً عملیاتی)
موقعیت
Bayern آلمان

اطلاعات دستگاه

نام دستگاه:
CNC milling machine
تولید کننده:
EMCO
مدل:
Concept Mill 55
شماره دستگاه:
F1F 161101
سال ساخت:
۲۰۱۶
وضعیت:
تقریباً نو (استفاده‌شده)
قابلیت عملکرد:
کاملاً عملیاتی
ساعات کارکرد:
۲۹۰ h

جزئیات فنی

مسافت جابجایی محور X:
۱۹۰ میلی‌متر
مسافت حرکت محور Y:
۱۴۰ میلی‌متر
مسافت حرکت محور Z:
۲۶۰ میلی‌متر
حداکثر سرعت اسپیندل:
۳٬۵۰۰ دور/دقیقه
عرض میز:
۱۲۵ میلی‌متر
طول میز:
۴۲۰ میلی‌متر
حداکثر سرعت چرخش:
۱۴٬۰۰۰ دور/دقیقه

ارائه

موقعیت:
Bayern, آلمان آلمان – فاصله: حدود ۳٬۹۸۱ کیلومتر
در دسترس بودن:
بلافاصله پس از پایان حراج
شرایط تحویل:
FCA
هزینه‌های پیاده‌سازی و بارگیری:
رایگان
تحویل در محل:
رایگان
هزینه ارسال:

توضیحات

Milling machine including engraving spindle device and 4th axis as well as preparation for automation!

Machine was used for training purposes and has only about 290 spindle hours

TECHNICAL DETAILS
X-axis travel: 190 mm
Y-axis travel: 140 mm
Z-axis travel: 260 mm
Usable Z-axis carriage travel: 120 / 190 mm
Distance spindle nose – table surface: 77 - 337 mm
Control : Heidenhain TNC 426 Mill

milling table
Clamping surface (L x W): 420 x 125 mm
Max. table load: 10 kg
T-slots according to DIN 650: 2 pieces, 11 mm
T-slot spacing: 90 mm

Milling spindle drive
Three-phase asynchronous motor power: 0.75 kW
Speed range (infinitely adjustable): 150 - 3,500 rpm
Max. torque: 3.7 Nm
Engraving spindle speed: 14,000 rpm

tool changer
Number of tool stations: 8
Max. tool weight: 1 kg
Max. tool diameter with / without changer: Ø 40 / 60 mm

feed drive
Accuracy thanks to 3-phase stepper motors: 0.5 µm
Working feed and rapid traverse: 0 - 2 m/min
Average position scatter: 0.008 mm

MACHINE DETAILS
Installation area (W x D): 960 x 1,000 mm
Total height: 980 mm
Total weight including tool changer: 220 kg
Spindle hours: 290 h

EQUIPMENT
- Win3D View Simulation
- 8-way tool changer with pick-up system and blow-out device
- Electronic handwheel
- Swivel table with keyboard extension
- Pneumatic vice 72 mm
- 4th axis with three-jaw chuck
- Engraving spindle device (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut



آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.

پرداخت‌ها

هزینه‌های جانبی خرید:
۱۸ %
شرایط پرداخت:
۱۰۰٪ پیش‌پرداخت
روش‌های پرداخت:
Vorkasse Überweisung Iconانتقال بانکی
Mastercard LogoVisa LogoCartebleue LogoKlarna LogoiDeal Logo
صورتحساب به میزان بالاترین پیشنهاد به‌علاوه هزینه‌های احتمالی دمونتاژ/بارگیری و حمل‌ونقل، همچنین هزینه‌های جانبی خرید و مالیات بر ارزش افزوده قانونی صادر می‌شود.

جزئیات پیشنهاد

شناسه آگهی:
A18690901
شماره مرجع:
AUC-2503033
به‌روزرسانی:
آخرین به‌روزرسانی در ۲۴.۱۲.۱۴۰۳
پیشنهاد انحصاری:
فقط در مزایده موجود است

تماس

Cedric Schuhmann
شخص تماس: Cedric Schuhmann
شناسه دستگاه: 18690901
SiegelSiegel

حفاظت خریدار Machineseeker‏

پرداخت امن از طریق حساب امانت
فروشنده کاملاً تأییدشده
پشتیبانی شخصی و چندزبانه
پرداخت مبلغ خرید فقط پس از تحویل کالا انجام می‌شود.

بازدید

امکان بازدید
دستگاه تحت برق است
ماشین‌زیکر اصولاً توصیه می‌کند ماشین‌آلات مستعمل بازدید شوند.
کلیه اطلاعات بر اساس بهترین دانش و وجدان ارائه شده است – لطفاً حضوری تأیید فرمایید.

تأمین‌کننده

Trustseal
فروشنده حرفه‌ای تجاری
Bayern آلمان آلمان
فاصله: حدود ۳٬۹۸۱ کیلومتر

اینجا می‌تواند دستگاه شما قرار گیرد

حراج با شماره 1

در عرض چند هفته می‌فروشید!
به بالاترین قیمت می‌فروشید!
بدون هزینه‌های ثابت و ریسک‌ها فروش دارید!
یا تماس بگیرید +49 201 857 861 10
بحث همکاری
این آگهی‌ها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
 EMCO Concept Mill 55, Bj. 2018, F1F81004
 EMCO Concept Mill 55, Bj. 2018, F1F81004
 EMCO Concept Mill 55, Bj. 2018, F1F81004
 EMCO Concept Mill 55, Bj. 2018, F1F81004
more images
اتریش Hallein
۳٬۸۰۰ km

EMCOConcept Mill 55, Bj. 2018, F1F81004
فروشنده تأییدشده
تماس بگیرید
آگهی کوچک
 EMCO CONCEPTMILL 55
 EMCO CONCEPTMILL 55
 EMCO CONCEPTMILL 55
 EMCO CONCEPTMILL 55
 EMCO CONCEPTMILL 55
 EMCO CONCEPTMILL 55
 EMCO CONCEPTMILL 55
more images
آلمان Weilheim an der Teck
۴٬۰۷۴ km

EMCOCONCEPTMILL 55
فروشنده تأییدشده
تماس بگیرید

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

  1. Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
  2. All prices and bids are net prices and do not include VAT.
  3. Stated dismantling and loading costs are binding.
  4. All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
  5. Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
  6. The duration of an auction may be subject to change.
  7. By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
  8. Submitted direct or maximum bids are binding.
  9. Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
  10. The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
  11. In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
  12. The General Auction Terms of Machineseeker Group GmbH apply.