6-axis machining centre MT

EDEL Werkzeugmaschinen GmbH ROTAMILL 2216

Machine configuration

ROTAMILL 2216

* Wide range of rotary table and milling head options available *

- NC Rotary table, Ø1.800 mm
- NC Fork-type Milling Head M-SERIES (A- and C-axis)
- Milling spindle CST-42-180-S
- Tool chain magazine, 54 pockets, HSK-A(T)63
- Chip conveyor
- NC Control HEIDENHAIN TNC 640
- Technology package turning
- 2-fold head change magazine, fully automated
- Preparation of the machine for wet machining
- Oil mist extraction unit, approx. 3.000 m³/h
- Workpiece measuring touch probe BLUM TC 60
- Tool measuring, BLUM LaserControl Single NT
- Kinematic 3D-calibration software - Heidenhain
- Kinematic tool kid
- CAD-Import (.step; .iges; .dxf)
- Remote diagnosis (Teleservice)
- Operator and maintenance training (1 day)
excl. travel cost and expenses
- Loading and (seaworthy) packing charges, FCA Jülich
as per Incoterms 2020
- Installation and run-off inside Germany incl. travel costs and expenses

OPTIONAL
- Coolant unit

Technical data
- Traverses X-axis = 2,200 mm
- Traverses Y-axis = 1,600 mm
- Traverses Z-axis = 1,200 mm
- Portal clearance (roof)- width (Y) = 2,250 mm
- Portal clearance - height (Z) = 1,465 mm
- Total weight, approx. = 41,000 kg
- Feed rate in X, Y and Z = 50 m/min
- Acceleration in X, Y and Z = 4 m/s2
- Feed force in X, Y and Z = 10.000 N

Rotary NC-Table
Rotary table (C1-Axis)
- Face plate, standard = Ø 1,800 mm
- Interference diameter = Ø 2,200 mm
- Payload – milling, max. = 6,000 kg

Drive C1-Axis – turning table HT
- Swivel range = 360° (endless)
- Rotational speed, max. = 30 rpm
- Torque, max. = 7,473 Nm
- Clamping moment = 13,000 Nm

Fork type NC-Milling-Head M-SERIES (A-Axis)
Drive A-Axis
- Swivel range = ±110° (60 rpm)
- Speed, max. = 100 rpm
- Feed rate, max. = 600°/s
- Nominal moment = 840 Nm
- Clamping moment = 4,000 Nm
Dksdpfx Ajr Hn Szea Tsi
Drive C2-Axis
- Swivel range = ±360°
- Speed max. = 65 rpm
- Feed range, max. = 390°/s
- Nominal moment = 1,020 Nm
- Clamping moment = 4,000 Nm

Milling spindle CST-42-180 S
- Power, S1 (S6-40% ED) = 42(53) kW
- Nominal moment = 2,000 rpm
- Torque, S1 (S6-40% ED), max. = 201 (253) Nm
- Speed, max. = 12,000 rpm
- Motor type = synchron/8-pole
- Tool holder = HSK-A63
- Clamping system = hydraulic
- Clamping force = 20 kN
- Installation dimension, stator = Ø 180 mm
- Spindle nose, length = 110 mm

Accuracies according to VDI / DGQ 3441
- P (X,Y,Z) = 0,012 mm
- P (C, A) = 5"
- Ps (X,Y,Z) = 0,008 mm
- P (C, A) = 3"

Tool chain magazine with double arm gripper
- Tool pockets = 54
- Tool holder = HSK-A(T)63
- Pocket distances = 110 mm
- Tool diameter, fully loaded = Ø 105 mm
- Tool diameter, max. = Ø 150 mm
- Tool length, max. = 300 mm
- Tool weight, max. = 8 kg

Footprint & Weight
- Length (X) = 6,830 mm
- Width (Y) = 6,970 mm
- Height (Z) = 5,150 mm