Horizontal machining center

DMG MORI NHX5000

Machine Description for 2017 Model: Horizontal Machining Center NHX 5000

Manufacturer: DMG MORI Co. Ltd.
Type / Model: NHX 5000_M730UM, Series J-NHX5000-C_C01
Year of Manufacture: 2016
Control System: MAPPS M730UM with CELOS / 21.5" ERGOline Touch

Technical Data:
• Working Area / Travel:
- Travel X / Y / Z: 730 / 730 / 880 mm
- Pallet size: 500 × 500 mm
- Max. workpiece diameter: 800 mm
- Max. workpiece height: 1,000 mm
- Distance spindle center to pallet surface: 80 – 810 mm
- Distance pallet center to spindle reference plane: 70 – 950 mm
- Pallet load: 500 kg [optional 700 kg]
- Number of pallets: 2
- Minimum table indexing angle: 1° [optional 0.001° rotary table]

• Performance / Spindle Speed / Drive Power:
- Spindle type: speedMASTER® motor spindle
- Spindle speed range: 35 – 15,000 rpm
- Power: 30.7 / 26 / 18.5 kW (15% ED / 30 min / continuous)
- Torque: 207 / 95.5 Nm (10% / 100% duty cycle)
- Tool taper: BT40 / #40
- Tool magazine capacity: 40 tools [optional: 60 / 120 / 180 / 240]
- Max. tool diameter: 70 mm (adjacent) / 170 mm (free)
- Max. tool length: 550 mm
- Max. tool weight: 12 kg
- Tool change time (chip-to-chip): 2.5 s
- Rapid traverse X/Y/Z: 60 m/min
- Feedrate range: 0 – 60,000 mm/min
Guedpfxjxnkgnj Aggoh
- Acceleration: 1 G

• Weight / Dimensions / Electrical Connection:
- Machine weight (incl. coolant tank): approx. 12,000 kg
- Installation footprint (W × L): 3,078 × 4,784 mm
- Overall height: 2,852 mm
- Coolant tank capacity: 800 L
- Power supply: 37.3 kVA
- Compressed air: 0.5 MPa / 420 L/min

Equipment / Accessories:
- NC rotary table with 0.001° indexing (DDM optional)
- Automatic 2-pallet changer (rotary APC)
- Two pallets with threaded holes and hydraulic fixture interface
- Chip conveyor (rear discharge)
- Direct measuring systems on X/Y/Z axes
- Renishaw OMP60 spindle probe system
- Tool breakage monitoring in the magazine
- High-pressure coolant interface (70 bar, Knoll)
- Coolant/air switching device for through-spindle supply
- Rotating inspection window
- Coolant gun
- Oil mist separator interface Ø200 mm (LTA AC3002 optional)
- Automatic loading station door
- Signal tower (red/yellow/green/blue)
- Portable manual pulse generator (handwheel)
- Air filter unit for clean compressed air supply
- 45 kVA transformer
- Knoll KF110/700 high-pressure coolant unit (7.0 MPa, 31 L/min)
- Three hydraulic clamping towers with double-jaw chucks
- CELOS system with apps (Production, Accessories, Support, Monitoring, Configuration)
- MAPPS M730UM control with 21.5" touchscreen and 15.6" sub-display
- SmartKey® operator access management

This technical description follows industry standards for horizontal machining center listings, ensuring clarity for prospective buyers on leading platforms such as Machineseeker.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.