Tool cutterDeckel
FP2 Aktiv
Tool cutter
Deckel
FP2 Aktiv
VB به اضافه مالیات بر ارزش افزوده
€۲۷٬۵۰۰
سال ساخت
۱۹۷۹
وضعیت
کارکرده
موقعیت
Ubstadt-Weiher 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Tool cutter
- تولید کننده:
- Deckel
- مدل:
- FP2 Aktiv
- سال ساخت:
- ۱۹۷۹
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۲۷٬۵۰۰
- موقعیت:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A16874546
- بهروزرسانی:
- آخرین بهروزرسانی در ۳۰.۰۵.۱۴۰۳
توضیحات
Universal milling machine Deckel FP2 with 3-axis active TNC 113 digital display Heidenhain and infinitely variable feed in TOP condition
Technical data:
Kdedpouc Ubwefx Agnou
>> Year of construction 1979 Machine no. 2202-10777
>> Rigid angle table (newly planed)
>> Speed: 25 - 2500 rpm
>> Feed stepless in 3 axes
>> Rapid traverse in 3 axes
>> Drive power .:2,2 KW
>> Spindle brake
>> Travel X/Y/Z: 400/220/400 mm
>> Vertical milling head can be moved 150 mm on headstock
>> Vertical quill and horizontal quill - SK40 extendable
>> Tightening system S20x2
>> Weight approx. 1400 kg
Accessories and equipment:
>> 3 axes TNC 113 active digital display Heidenhain
>> Coolant device
>> Central lubrication
To the machine :
We are offering a Deckel FP2 universal milling machine in very good condition. The FP2 comes from a laboratory of a state-owned company where it was used very little. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Technical data:
Kdedpouc Ubwefx Agnou
>> Year of construction 1979 Machine no. 2202-10777
>> Rigid angle table (newly planed)
>> Speed: 25 - 2500 rpm
>> Feed stepless in 3 axes
>> Rapid traverse in 3 axes
>> Drive power .:2,2 KW
>> Spindle brake
>> Travel X/Y/Z: 400/220/400 mm
>> Vertical milling head can be moved 150 mm on headstock
>> Vertical quill and horizontal quill - SK40 extendable
>> Tightening system S20x2
>> Weight approx. 1400 kg
Accessories and equipment:
>> 3 axes TNC 113 active digital display Heidenhain
>> Coolant device
>> Central lubrication
To the machine :
We are offering a Deckel FP2 universal milling machine in very good condition. The FP2 comes from a laboratory of a state-owned company where it was used very little. The machine has very little crank play and all spindles can be moved easily. The milling machine runs smoothly even at maximum speeds. On this newer FP2 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine on site under power.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2007
ارسال درخواست
تلفن & فکس
+49 7251 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک

۴٬۱۲۹ km
DeckelFP 2 aktiv
آگهی کوچک

۳٬۹۷۰ km
DECKELFP 1 Aktiv (2-Achsen-Aktiv)
آگهی کوچک

۳٬۹۷۰ km
DECKELFP 2 Aktiv
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است