CNC vertical travelling column bed milling machine with Heidenhain iTNC 530, VMC, BAZ 3-axis vertica

DECKEL MAHO (DMG) DMF 220 Linear - iTNC

CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO
Vertical Machining Center Type DMF 220 linear
Serial No.: 15115223474 Year of manufacture: 2008
CNC 3-D contouring control Heidenhain iTNC 530
Credew Iqt Aepfx Afnjh
Travel X: 2200 mm, Y: 560 mm, Z: 720 mm
Table size 2600 x 605 mm
Table load capacity 2200 kg
Table height above floor 870 mm
Distance table to spindle nose max. 752 mm
Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872
Spindle speed max. 12,000 rpm
Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle
Feed rate 0–20,000 mm/min
Rapid traverse X-axis 100 m/min
Rapid traverse Y+Z-axis 50 m/min
Power supply 400 Volt, 50 Hz, 73 kVA
- 30-position tool changer
- Internal coolant supply through the spindle, 40 bar (IKZ)
- Air blast with minimum quantity lubrication for tool cooling
- Air blast through spindle center via M-function
- 2 rotating safety windows
- Operating mode 4, process monitoring during production
- Electronic handwheel at the handheld command station
- Separate coolant treatment system, paper band filter with filtration sump
- Chip conveyor for positioning under the work area
- Centralised grease lubrication
- Operating manual
- Operating hours – control on = 75,188 h
- Operating hours – program run or spindle on = 31,632 h
- Controller with interfaces for data transfer, RS232C + USB
Footprint L x W x H 650 x 400 x 280 cm
Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel)
Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg)
Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg)
Main machine transport dimensions L x W x H 500 x 248 x 275 cm
Additional transport space required for further parts 550 x 240 x 250 cm
Weight of main machine approx. 12.5 t
Good condition

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.