Vertical machining center

Dahlih MCV 1050

- FANUC 0i-MF Plus "NEW"
- 10.4" LCD color screen
- Diagonal, MANUAL GUIDE i

Machine Table
- Table size: 1,120 x 560 mm
- Load capacity: 1,000 kg
- T-slot width: 18 mm
- Number of T-slots: 5
- T-slot spacing: 100 mm
- Table height from floor: 900 mm
Travel paths and distances
- X / Y / Z travel paths: 1,050 / 560 / 560 mm
- Spindle nose to table surface: 150 - 710 mm
- Spindle center to column: 600 mm
Linear axis guides & speeds
- Flat guides in X / Y / Z axes
- Rapid traverse X/Y/Z: 36/36/34 m/min
- Milling feed: 1 – 10,000 mm/min
- Minimum increment: 0.001 mm
Tool magazine (CAM type) / tool changer
- Tool holder: BBT-50 (optional SK-50)
- Number of magazine positions: 24
- System: random
- Max. tool diameter: Ø 105 mm
- Max. tool diameter with free adjacent positions: Ø200 mm
- Max. tool length: 300 mm
- Max. tool weight: 15 kg

Spindle
- Spindle taper: BTT-50 BIG-PLUS® (optional SK-50)
- Drive type: 2-stage gearbox
- Speed level 1: 80 - 1,500 rpm
- Speed level 2: 1,500 - 8,000 rpm
- Drive power (30 min/continuous): 11 / 7.5 kW
- Torque (30 min/continuous): 236/161 Nm up to 369 rpm
- Lubrication: Grease
- Inner bearing diameter: Ø80 mm
- Spindle cooling: Oil
Coolant, chip, and compressed air management
- Coolant system including 400-liter tank and pumps
- External coolant around the spindle
- Internal cooling 50 bar
- Bed flushing, 0.85 kW / 130 l/min., (optional)
- Chip spirals on the right and left side of the machine bed
Chips are conveyed to the front of the machine
- Chip spiral (optional: belt or scraper belt chip conveyor)
Chips are conveyed to the left side of the machine
- Compressed air nozzle on the spindle (M32/M33)
- Compressed air through the spindle (M38/M39), (Optional)
- Compressed air and coolant gun

Other Equipment
- Pivoting control panel
- Electronic handwheel (wired)
- Central oil/air lubrication system
- Spindle oil cooler
- Fully enclosed housing
- Work light
Gcsdjwkf Izspfx Adhoa
- Heat exchanger on the control cabinet
- Auto-Power OFF function
- Hand tool set
- Signal light
- Transformer 400 VAC, 50 Hz
- CE Declaration of Conformity

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.