Section bending machine - three-roll bending machineCurvatrice
DS60
Section bending machine - three-roll bending machine
Curvatrice
DS60
EXW VB به اضافه مالیات بر ارزش افزوده
€۲٬۹۵۰
سال ساخت
۲۰۰۰
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Metelen 

اطلاعات پایه
قیمت و مکان
EXW VB به اضافه مالیات بر ارزش افزوده
€۲٬۹۵۰
- موقعیت:
- Metelen, آلمان

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A23348291
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۷.۰۸.۱۴۰۵
توضیحات
Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Ready for Use & with Special Modification
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
Knodpfx Ake Akvcdoied
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
Knodpfx Ake Akvcdoied
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین حضور آنلاین: دیروز
ثبت شده از: 2026
۱۶ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 2556 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Balaguer
۴٬۷۳۲ km
OerlikonLP100
موفق
پیام شما ارسال شد.
آگهی کوچک
Hergensweiler
۴٬۰۴۱ km
Protec 10 ToKT 10 000
موفق
پیام شما ارسال شد.
آگهی کوچک
Kirchheim unter Teck
۴٬۰۸۱ km
KELLENBERGERR175-1500
موفق
پیام شما ارسال شد.
آگهی کوچک
Écouflant
۴٬۸۰۹ km
DAVIMCP18
موفق
پیام شما ارسال شد.
آگهی کوچک
آلمان
۳٬۹۴۶ km
IMCAR4RH 17/5
موفق
پیام شما ارسال شد.
آگهی کوچک
Ringaudai
۳٬۴۲۰ km
FRONIUSPLASMA WELDING
موفق
پیام شما ارسال شد.
آگهی کوچک
Dortmund
۴٬۲۷۷ km
AVIAFNE 50 N / TNC 410
موفق
پیام شما ارسال شد.
آگهی کوچک
Wien
۳٬۵۷۴ km
AKBENDAHS 30/08
موفق
پیام شما ارسال شد.
آگهی کوچک
Ditzingen
۴٬۱۱۹ km
Orbitalum
موفق
پیام شما ارسال شد.
آگهی کوچک
Ahaus
۴٬۳۲۳ km
AKBENDAPK 50
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است































































































































