Broaching machineBlacks
CNB 34
Broaching machine
Blacks
CNB 34
سال ساخت
۲۰۰۵
وضعیت
کارکرده
موقعیت
Hövelhof 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Broaching machine
- تولید کننده:
- Blacks
- مدل:
- CNB 34
- سال ساخت:
- ۲۰۰۵
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Mergelweg 206, 33161 Hövelhof, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19804725
- شماره مرجع:
- WAG 882
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۹.۰۵.۱۴۰۴
توضیحات
Vertical Notch Broaching Machine
Manufacturer: Blacks
Model: 1 W-CNB 34
Machine No.: S05035C
Year of manufacture: 4/2005
Gedew Rpvzopfx Agmsbg
Weight: 95kg
General / Technical Data:
Very well-maintained broaching machine for external notching of samples for tensile testing
Broaching speeds: variable from 0.43 to 2.27 m/min
Dimensions (H x W x D): 1370mm x 600mm x 450mm
Power supply: 400V / 50 Hz
Equipment:
- Variable speed control via adjustable mechanical gearbox (manufacturer: Lenze); no electronic control!
- Clamping fixture for tensile specimens
- 3 used broaching tools
- Machine documentation in German and English
- Machine documentation including “CE” declaration of conformity in English
General Information
The dual spindle drive ensures smooth operation and a centrally aligned pull point, as well as a consistently uniform broaching speed.
The broaching machine is a specially designed unit for machining V- and U-notches according to Charpy and Izod standards in pre-machined, square 10-mm standard test specimens.
The CNB-34 produces a consistent notch of higher quality than what is achievable by milling.
The machine is easy to operate and features a robust construction with removable maintenance panels for convenient routine servicing. Its design provides a comfortable working height.
During the cutting process, a specially designed broaching tool is drawn over the specimen. The broaching tool is pulled downward into the machine via a gearbox and a dual spindle drive.
The specimen is secured in the machine using the special clamping fixture. The broaching tool is lubricated with cutting oil. By pressing the broaching cycle button, the notch tool is forcibly guided down through the specimen, producing an accurate notch profile. After cutting the notch, the specimen must be removed before returning the tool. The tool is then returned without a workpiece and cleaned of any chips. Only after this cleaning step is the machine ready for further operation.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Manufacturer: Blacks
Model: 1 W-CNB 34
Machine No.: S05035C
Year of manufacture: 4/2005
Gedew Rpvzopfx Agmsbg
Weight: 95kg
General / Technical Data:
Very well-maintained broaching machine for external notching of samples for tensile testing
Broaching speeds: variable from 0.43 to 2.27 m/min
Dimensions (H x W x D): 1370mm x 600mm x 450mm
Power supply: 400V / 50 Hz
Equipment:
- Variable speed control via adjustable mechanical gearbox (manufacturer: Lenze); no electronic control!
- Clamping fixture for tensile specimens
- 3 used broaching tools
- Machine documentation in German and English
- Machine documentation including “CE” declaration of conformity in English
General Information
The dual spindle drive ensures smooth operation and a centrally aligned pull point, as well as a consistently uniform broaching speed.
The broaching machine is a specially designed unit for machining V- and U-notches according to Charpy and Izod standards in pre-machined, square 10-mm standard test specimens.
The CNB-34 produces a consistent notch of higher quality than what is achievable by milling.
The machine is easy to operate and features a robust construction with removable maintenance panels for convenient routine servicing. Its design provides a comfortable working height.
During the cutting process, a specially designed broaching tool is drawn over the specimen. The broaching tool is pulled downward into the machine via a gearbox and a dual spindle drive.
The specimen is secured in the machine using the special clamping fixture. The broaching tool is lubricated with cutting oil. By pressing the broaching cycle button, the notch tool is forcibly guided down through the specimen, producing an accurate notch profile. After cutting the notch, the specimen must be removed before returning the tool. The tool is then returned without a workpiece and cleaned of any chips. Only after this cleaning step is the machine ready for further operation.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2003
ارسال درخواست
تلفن & فکس
+49 5257 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Hessisch Lichtenau
۴٬۱۱۹ km
WEILERLZ PRIMUS GS
آگهی کوچک
Iserlohn
۴٬۲۶۷ km
JAESPAW 400 AZ/P-Minipos
آگهی کوچک
ایرلند
۵٬۳۷۷ km
Double Sink Stainless Steel
آگهی کوچک
Mudersbach
۴٬۲۳۱ km
BernardoMaster 360 Pro
آگهی کوچک
آلمان
۳٬۹۴۶ km
MeuserDLZ 400x1000
آگهی کوچک
Ubstadt-Weiher
۴٬۱۵۱ km
WEILERCommodor B - Teilüberholt
آگهی کوچک
Schlüchtern
۴٬۱۱۲ km
Voest AlpineDA 160
آگهی کوچک
Eislingen/Fils
۴٬۰۶۴ km
OPTIMUMOptimill MF 4 Vario
آگهی کوچک
Hövelhof
۴٬۲۰۴ km
داخلی دستگاه و سخت به اندازه
Arthur KlinkRISZ 10x1000x400
Arthur KlinkRISZ 10x1000x400
آگهی کوچک
Malsch
۴٬۱۶۸ km
SUNNENMBC 1804
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است




































































































