Bar machining center

elumatec AG SBZ140 (Bearbeitungslänge 6,4m)

elumatec 4-axis profile machining center with 6,400 mm working length for flexible and efficient processing of aluminum and thin-walled steel profiles.

Description:
- Short tool change times thanks to a traveling tool changer
- Fast positioning of the machining unit at up to 63 m/min due to dynamic servo drives
- Modern 4-axis control for spatial machining operations
- No axis referencing required thanks to the use of absolute encoder systems
- Gentle on material surfaces thanks to processing on stationary profiles
- Collision avoidance through automatic clamp detection and positioning
- Certified, drive-integrated safety functions:
- STO = Safe Torque Off
- SS2 = Safe Stop 2
- SLS = Safely Limited Speed
Podpjwyvcbofx Ab Djgw
- Power-torque milling motor with closed-loop speed control for short acceleration and braking times of the spindle
- Energy recovery via DC link coupling of the axis drives with regenerative feedback and buffering of the drive braking energy
- Green-Line cooling unit with reduced energy consumption
- Thread cutting without compensation chuck
- Operator terminal with Windows operating system, large 15" flat screen
- Connections: 2 x USB, network with RJ45 10/100 MBit
- Easy and convenient programming via eluCam at the operator terminal, possible even during machining
- Remote maintenance via TCP/IP with existing internet access
- 2-circuit clamping system

Technical Data:
Travel and machining ranges:
- X-axis [mm]: up to 6,760 / 6,400
- Y-axis [mm]: up to 845 / 645
- Z-axis [mm]: up to 620 / 250
- Swivel range A-axis: -90° 0° +90°

Travel speeds:
- X-/Y-/Z-axis [m/min]: 63/60/60
- A-axis [°/sec]: 144

Milling spindle:
- Speed [rpm]: up to 24,000
- Power [kW]: 11
- Cooling: air
- Tool holder: HSK-F 63

Tool changer system:
- 8 tool positions
- Tool length: max. 180mm (tool + holder)
- Balance quality per DIN 1940: minimum G2.5

Machine equipment:
- Automatic tool changer (without tool holders)
- 8 horizontal pneumatic material clamping units
- Cooling unit for control cabinet
- 2-circuit clamping system
- 2 pneumatic material stops
- Uninterruptible power supply (UPS) for PC
- Central lubrication
- Minimum quantity lubrication for the tools
- Hand-held control unit with potentiometer
- Central chip tray in the machine bed
- 1 front safety light curtain system
- Safety fence left and right
- Depth gauge
- incl. length measurement for profile bars
- incl. various used tool holders and cutters

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.